Oki B2500 Series manual Local network settings, Selecting the type of your local network

Page 37

B2520 / B2540

Local network settings

You may connect your multifunction terminal to an Ethernet or a wireless network.

However, practical knowledge of your computer configuration is required to set up a network.

Selecting the type of your local network

This parameter allows you to configure your terminal accordingly to the type of network you will install it in.

26 - SETUP/LOCAL NETWORK

1 Select the desired network type using the or buttons

-WLAN if using a wireless network

-LAN ETHERNET if using a wired network

2Confirm with OK.

Ethernet network settings (Model B2540)

Automatic configuration

We recommend that you carry out a manual configuration of your terminal. The automatic configuration of the local network settings may be considered, if your local network features a DHCP or BOOTP server that can dynamically assign addresses to the peripheral devices present on the LAN.

To automatically configure the local network settings:

271 - SETUP/LAN ETHER/IP CONFIG.

1Choose Automatic and press OK to confirm. The terminal scans the local network for a DHCP or BOOTP server that can assign it its settings dynamically (the message Self-conf is displayed).

2Once the message Self-conf has disappeared, check for the IP Address, Sub-network mask and Gateway address. If these are missing, you should carry out a manual configuration (see below).

Manual configuration

To configure your terminal manually, you should obtain the usual information used to set a peripheral device (IP address, sub-network mask, network and gateway address).

To configure the local network setting manually:

271 - SETUP/LAN ETHER/IP CONFIG.

1Choose Manual and press OK to confirm.

IP address

network

272 - SETUP/LAN ETHER/ADRESSE IP

 

1 Enter the IP address of your terminal and press OK

 

to confirm.

WLAN

Sub-network mask

 

273 - SETUP/LAN ETHER/MSK SS RES.

 

1 Enter the sub-network mask of your terminal and

-

press OK to confirm.

8

Gateway address

 

274 - SETUP/LAN ETHER/PASSERELLE

 

1Enter the IP address of the network gateway and press OK to confirm.

IEEE Address (or Ethernet address) or MAC address

275 - SETUP/LAN ETHER/IEEE ADDRESS

The Ethernet card of your terminal already has an unmodifiable, yet consultable, IEEE address.

NetBIOS names

These names, which can be used with the network options, are used to identify your terminal machine from a PC connected to a local network (for instance with the name "IMP-NETWORK-1").

276 - SETUP/LAN ETHER/NETBIOS 1

277 - SETUP/LAN ETHER/NETBIOS 2

1Enter the selected name (15 characters max) and press OK to confirm.

Serveurs de nom

The WINS1 and WINS2 servers, used with the network options, allow access to terminals on other sub-networks by means of their NetBIOS name.

278 - SETUP/LAN ETHER/NETBIOS 1

279 - SETUP/LAN ETHER/NETBIOS 1

1Enter the IP address of each server, then validate with OK.

If the terminal is set up in Automatic configuration mode (menu 271), these addresses can be filled in automatically by certain DHCP servers.

- 32 -

Page 36 Page 38
Image 37
Page 36 Page 38
Contents User’s Guide Dear customer Refer to the Maintenance section of this bookletDear customer ConsumablesContents Lock the machine Introduction Configuration requirements InstallationRead the counters Display the consumables status Calibrate your scannerContents Information Software use license PrefacePreface Environmental Preface Environmental Information Software use license Environmental InformationSoftware use license Prohibited reproductions Registered trademarksApplicable law Installation InstallationLocation conditions Running environmentEP Cartridge recommendations Paper recommendationsControl panel Terminal descriptionAccessing terminal menus Command panelDevice installation Packaging contentsInstalling the document feeder Feed cassette paper insertionPush the lower panel down until it clicks Cartridge installationStarting your device Paper delivery stopDevice connection Paper insertion in the manual input tray Copy ECO mode copyCopy Simple copySpecial setup for the copying Sheet-feed analysis margins setup Paper type setupAnalysis margins setup Left and right printing margins setupFax transmission FaxFax reception Fax Saving an access codeRelay broadcast Fax answering machineRerouting fax messages to a USB memory key Fax reroutingTransmission waiting queue Cancelling a transmission in progressMailBoxes MBX Fax Printing the contents of a MBX Modifying the features of a MBXCreating an MBX Deleting a MBXMBX polling from a remote fax Deposit and PollingPlacing a document in deposit Polling a deposited documentSMS Parameters SMSSending an SMS Presentation of the senderParameters/Setup Parameters SetupTransmission report Local prefixDocument feed type Economy periodReceived faxes reduction mode Reception ModeReception without paper Number of copiesTechnical Parameters Setup / TechnicalsPrint / Functions List Printing the functions guidePrinting the logs Print the list of setupsFont printing Lock the machineDisplay the consumables status Read the countersCalibrate your scanner Creating subscribers record DirectoryCreating subscribers list Modifying a recordDirectory Directory / CancelDeleting a record or a list Printing the directoryEthernet network settings Model B2540 Local network settingsSelecting the type of your local network Type of radio network Wlan networkRadio ad-hoc network Radio networks WlanSetup / Wlan / ASS. Config Configure your networkConnect your Wlan adaptor Creating or rejoining a networkSetup / Wlan / Parameters / Gateway Setup / Wlan / Parameters / Subnet MaskSetup /WLAN / Parameters / Ssid Setup / Wlan / Parameters / ModeAn example of how an AD-HOC network may be set up Setting up a multifunction machineSetting up the PC Setup / Wlan / Parameters HostnameService Message service Model B2540Connection configuration Message service Model B2540Standard settings Scan to FTPMail sorting Key USB memory keyUse of the USB memory key Print your documentsDelete your files located in the key Save a document on a USB memory KeyMedia / Delete / Manual Media / Media AnalysisConfiguration requirements PC FeaturesInstallation Install the software on your PCB2520 / B2540 Connections Make sure that your multifunction machine is powered offUSB Connection Network connectionUninstall the software from your PC PC FeaturesNext screen shows the list of compatible Preparation screen appearsMF Director Multifunction Terminals SupervisionGraphical presentation Utilities and applications activationCompanion Suite Pro LL functionalities MF MonitorDisplay the consumable status Document analysisAnalysis from a Twain compatible software PrintingCharacter recognition software OCR Printing with the multifunction machineAdd a contact to the terminal address book Address bookAdd a group to the terminal address book Import or export a directory Manage the address bookPresentation of the Fax window Send a fax Fax communicationsSend a fax from the hard disk or the terminal Follow-up of fax communications Receive a faxSend a fax from application OutboxFax parameters Cover sheet FeaturesCreating a cover sheet Click on the icon To display the available fieldsCreating a cover page template Description of the tab CoverFor the second step Presentation of the SMS window SMS CommunicationSend an SMS Click on NEW then on SMSFollow-up of SMS Access to SMS parametersSent item memory items sent Description of the tab Logs and ReportsService MaintenanceToner cartridge replacement Issues with smart cardsCleaning MaintenancePrinter cleaning Printer issuesMiscellaneous issues Scanner issuesCommunication errors Transmission from the feeder Communication error codesTransmission from memory General codesPhysical specifications SpecificationsElectrical specifications Environmental specificationsReference paper Consumable specificationsIBC PobÔežní 186 00 Praha Czech Republic Tel. +420 224 Oki Systems Iberica, S.A Kat 18 D 35 34394 Levent İstanbul Tel +90 212 279 Oki Europe Limited 07077701 iss.1
Top Page Image Contents