SETTING MENU1
– SETTING PROGRAM REC
5 | PROGRAM SETUP 1 | • How to set a PROGRAM REC |
| example) To set up a programmed recording | |
| from 13:03 to 13:15 on Monday in |
the L3H mode.
6 | PROGRAM SETUP 2 | • When 5 program is set in the PROGRAM SETUP 1, select |
| PROGRAM SETUP 2. | |
| • Use the same method for setting PROGRAM REC as in the |
PROGRAM SETUP 1.
| PROGRAM SETUP1 |
| |||
| START | STOP | DATE | MODE | |
• ❿ 13:03 | → | 13:15 | MON | L3H | |
• | 13:03 | → | 13:15 | DAILY | L24H |
• |
|
|
|
|
|
• | OFF | → |
|
|
|
• | 13:03 | 13:15 | MON | L12H | |
• | PROGRAM SETUP2 |
| |||
( ❷❿ /– +,CLEAR) | END:MENU |
1. | Press the SHIFT ❷ button to move the cursor |
| to the vacant program position. |
2. | Press the SHIFT ❿!button to display the |
| current time. |
3. | Press the TRACKING/SET "+" or |
| set the hour of the starting time. |
4. | Press the SHIFT ❿!button to move to the |
PROGRAM SETUP2 START STOP DATE MODE
• ❿
•
•
•
•
• PROGRAM SETUP1
( ❷❿ /– +,CLEAR) | END:MENU |
*When finished with PROGRAM SETUP 1, 2 press MENU to end and press TIMER to begin standby.
MENU
POWER
TIMER |
CAUTION
1.You can use only the POWER or RESET buttons during PROGRAM REC.
2.During a PROGRAM REC, to
cancel the recording press the POWER button.
3.To cancel a PROGRAM REC, select the event and press CLEAR button to display "OFF".
Pressing the SHIFT ❿!button again in the OFF position to toggles the time set before.
| minute. |
5. | Press the TRACKING/SET "+" or |
| set the minute of the starting time. |
6. | By the same methode, set up the ending time |
| and move to the date. |
7. | Press the TRACKING/SET "+" or |
| set monday and press SHIFT ❿!button. |
8. | Press the TRACKING/SET "+" or |
| set L3H and press SHIFT ❿!button. |
9. By the same method, set up the NEXT |
REC
REC
C.MEMO
*The tape will be ejected and the beeper will sound if the tape safety tab has been removed.
–CHECKING POWER FAILURE TIME AND DATE.
PROGRAM REC which you may want. |
•DAILY : The programmed recording is made at the same time every day.
7 POWER LOSS MEMORY
• Displays the memorized time of a power failure and power restore.
* example) If there was a power failure on 17:30:30 12. 23. 2002, |
and a power restore on 17:40:00 12. 23. 2002. |
REFERENCE
| POWER LOSS MEMORY | |||
• |
| YEAR | DATE | TIME |
OFF | 2002 | 12/25 | 15:00:00 | |
• | ON | 2002 | 12/25 | 15:15:37 |
OFF | 2002 | 12/24 | 13:25:00 | |
• | ON | 2002 | 12/24 | 13:26:00 |
OFF | 2002 | 12/23 | 17:30:30 | |
| ON | 2002 | 12/23 | 17:40:00 |
(17:30:30= 17 Hours 30 minutes 30 seconds) |
* example) If there was a power failure on 13:25:00 12. 24. 2002 |
and a power restore on 13:26:00 12. 24. 2002, |
repeatedly. |
You can set up to 10 programs a week
19
1. OFF 2002 12/24 13:25:00
END:MENUON 2002 12/24 13:26:00 2. OFF 2002 12/23 17:30:30 ON 2002 12/23 17:40:30
3.OFF ON
•The screen displays the three most recent events. The most recent power failure is listed first.
20