GB
Controls and Menus
1. The LCD display has a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for short periods of time. In standby mode the monitor is switched off but is still receiving mains power.
●To turn the monitor into standby mode, press the 4 button. The blue power indicator illuminates more brightly.
●To turn the monitor ON from standby mode, press any of the following buttons: 4, 5, 6 or
If you find the power indicator flashing, disconnect power cord from the power outlet and contact our Service desk.
This warning is a sign to let you know that the power protection function of this TV set is now operating.
2.Control buttons (bottom edge of cabinet)
Menu/F button: rotate between volume, Brightness, contrast, colour, sharpness and OSD language.
Input/ OK button: switch between TV, AV1, RGB, AV2, AV3, DVI and PC mode.
ed buttons: provide up and down adjustments
4button: To switch from display to standby mode (to switch off completely disconnect the monitor from the power supply)
6
GB
Menu Operation
Many of your monitors functions are controlled through the menu function, using the remote control handset.
During menu operation the bottom of the on screen display will show which controls can be used for menu navigation.
Press the MENU button to enter the main menu.
A sub menu is selected using the e or d button and pressing the 1 button when the required sub menu is highlighted.
When you have finished you can press the MENU button to exit, then the MENU button again to exit the main menu.
Picture menu
1. Press the MENU button. Select Picture using the e or d button. Press the1button to enter.
Set the picture settings for your “personal” preference.
2. Use the e or d button to select eg. Brightness and the 1 2 button to adjust levels.
3.Preset : You can select either your “Personal” settings, or Dynamic, Standard or Eco settings.
4.Noise Reduction: May be used to reduce any local picture ‘noise’ (granular appearance) being experienced by using 1 2 to select between Mid / Max / Auto / OFF /Min.
5.Dynamic skin tone: May be used to enhance skin tone by using
12 to select between On / Off.
Tint : is only available if NTSC equipment is connected.
6.Text Brightness: May be adjusted by using 1 2 button to select between Min / Mid / Max.
Press the MENU button to return to Main Menu. These settings automatically store when you exit the menu.
Press the MENU button to exit menu.
7.Dynamic contrast (DCR): Improves the contrast leveL
✐Your personal settings are automatically saved when you exit the menu.