Pioneer DJM-400 Connecting Inputs, Connecting Outputs, Connecting the Power Cord, English

Page 5

CONNECTIONS

Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.

CONNECTING INPUTS

Pioneer DJ CD players

Connect a DJ CD player’s audio output connectors to one of the channel 1 to 2 CD input connectors, and connect the player’s control cable to the corresponding channel’s CONTROL connector.

Set the connected channel’s input selector switch to [CD].

Analog turntable

To connect an analog turntable, connect the turntable’s audio output cable to one of the channel 1 to 2 PHONO/LINE input connectors. Set the corresponding channel’s PHONO/LINE switch to [PHONO], and set the channel’s input selector switch to [PHONO/LINE]. The DJM- 400’s PHONO inputs support MM cartridges. Connect the turntable’s ground wire to the DJM-400’s SIGNAL GND terminal.

Connecting other devices with line level output

To use a cassette deck or other CD player, connect the component’s audio output connectors to one of the channel 1 to 2 PHONO/LINE input connectors. Then set the corresponding channel’s PHONO/ LINE switch to [LINE], and the input selector switch to [PHONO/LINE].

Microphone

The MIC1 and MIC2 jacks can be used to connect microphones with Ø6.3 mm phone plugs. Set MIC/AUX switch to [MIC] position.

Auxiliary input connectors

The MIC1 and MIC2 jacks can also be used together as a pair of stereo line input connectors to connect a component equipped with line level output connectors. Connect the component’s L channel to MIC1 (AUX(L)) jack and the R channel to the MIC2 (AUX(R)) jack. Then set the MIC/AUX switch to [AUX] (this connection requires the use of Ø6.3 mm phone plugs).

CONNECTING OUTPUTS

Master output

This unit is furnished with MASTER OUT 1 and MASTER OUT 2 output systems, both of which support the use of RCA plugs.

If the unit’s STEREO/MONO switch is set to [MONO], the master output will be a monaural combination of L+R channels.

Headphones

The front panel PHONES jack can be used to connect headphones

with a Ø6.3 mm stereo phone plug.

STEREO/MONO switch

Front panel

English

 

 

 

 

 

 

POWER

MONO

 

STEREO

 

 

 

 

 

 

 

OFF

ON

 

 

 

 

 

AC IN

 

1

 

2

 

 

 

MASTER

L

 

 

 

 

 

OUT

 

 

 

 

 

 

R

 

 

 

 

 

L

R

R

L

 

 

Power amplifier

 

 

 

 

 

 

Cassette deck, etc.

Power amplfier

Headphones

 

(analog input recording

 

 

 

 

 

component)

 

 

 

 

 

 

CONNECTING THE POWER CORD

Connect the power cord last.

÷After completing all other connections, connect the accessory power cord to the AC inlet on the back of the player, then connect the plug to a standard wall outlet or to the auxiliary power outlet of your amplifier.

÷Use only the supplied power cord.

MIC/AUX switch

 

 

 

 

 

 

 

 

 

Input selector switches

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Microphone 2

 

 

MONO

STEREO

 

MIC2

 

MIC1

 

 

 

 

 

POWER

 

 

AUX(R)

 

AUX(L)

 

 

 

 

 

Microphone 1

 

 

 

 

MIC

 

AUX

 

 

 

 

 

OFF ON

 

 

 

 

 

 

 

 

 

 

AC IN

 

 

 

 

PHONO

CD

 

 

PHONO

CD

 

 

 

1

 

2

 

LINE

 

 

LINE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MASTER

 

 

 

 

 

 

 

 

 

 

SIGNAL

 

 

OUT

L

 

 

L

 

 

 

L

 

 

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LINE PHONO

 

 

 

LINE PHONO

 

 

 

 

R

 

R

 

 

R

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL

 

 

 

CONTROL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

Electronic instrument,

PHONO/LINE switch

 

L

R

R

L

R

L

R

L

R

L

 

CD player, etc. (phone

 

 

plug connection)

Note:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set switch to [LINE]

 

 

 

 

 

 

 

 

 

 

 

 

 

except when using

 

 

 

 

 

 

 

 

 

 

 

 

 

an analog turntable

 

 

 

 

 

 

 

 

 

 

 

 

 

Cassette deck, etc.

 

Analog turntable

 

 

Analog turntable

DJ CD player

DJ CD player

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

<DRB1404>

 

 

 

 

 

 

 

 

 

 

 

 

 

En

Image 5
Contents DJM-400 POWER-CORD Caution Cleaning the UnitLocation Important the Moulded PlugFeatures ContentsConnection Panel ConnectionsRear panel Front panelConnecting Outputs Connecting InputsConnecting the Power Cord EnglishFader Start Names and Functions of PartsNames and Functions of Parts CH. Select 1/2/MIC/MASTER BankBasic Operations Mixer OperationsUsing the Channel Fader to Start Playback Using the Cross Fader to Start PlaybackFader Start Function Mixer Operations Fader Start FunctionTypes of Beat Effects Effect FunctionsUsing the BEAT/PITCH buttons for Manual BPM Input Using the TAP Button for Manual BPM InputProducing Beat Effects IN-LOOP SamplerTo Playback a Recorded Sample Effect ParametersErasing a Recorded Sample Effect Functions IN-LOOP SAMPLER/EFFECT ParametersTroubleshooting TroubleshootingSymptom Possible Cause Remedy ThruAvertissements Concernant L’USAGE EmplacementNettoyer l’appareil AvertissementCaractéristiques Table DES MatièresAvant L’UTILISATION UtilisationPanneau DE Connexion BranchementsPanneau arrière Panneau avantFrançais Branchement DES EntréesBranchements DE Sortie Noms ET Fonctions DES Organes Noms ET Fonctions DES OrganesMaster Level DELAY/ECHO/FILTER/FLANGER/PHASER ROBOT/ROLL/IN-LOOP SamplerDémarches DE Base Utilisation DU MixeurSélection de la courbe de fondu croisé Fonction DE Départ EN FonduLancement de la lecture par fondu croisé Lancement de la lecture par fondu de canalFonctions DES Effets Types D’EFFETS DE Battement Fonctions DES EffetsTypes D’EFFETS DE Battement Utilisation du bouton TAP pour une saisie BPM manuelle Production D’EFFETS DE BattementÉchantillonneur D’ENTRÉE DE Boucle Effacement d’un échantillon enregistré Paramètres DES EffetsLecture d’un échantillon enregistré Master Level Symptômes Causes possibles CorrectionsWichtig Vorsichtshinweise ZUR HandhabungAufstellung Reinigen des GerätesMerkmale InhaltsverzeichnisTechnische Daten Anschlüsse AnschlüsseRückwand Frontplatte Deutsch Anschlüsse AN DEN EingangsbuchsenAnschliessen DES Netzkabels Anschlüsse AN DEN AusgangsbuchsenMaster-Ausgang KopfhörerBezeichnung UND Funktion DER Bedienelemente FLANGER/PHASER/ROBOT/ROLL/IN-LOOP Sampler Grundlegende Bedienungsverfahren Bedienung DES MischpultsStarten der Wiedergabe über Kanal-Faderhebel FADER-STARTFUNKTIONBedienung DES Mischpults FADER-STARTFUNKTION Wiedergabestart und Cue-Rücklauf über Kreuz-FaderhebelEffektfunktionen BEAT-EFFEKTTYPEN EffektfunktionenBEAT-EFFEKTTYPEN Gebrauch der TAP-Taste für manuelle Eingabe des BPM-Wertes Erzeugen VON BEAT-EFFEKTENEffektfunktionen Erzeugen VON BEAT-EFFEKTEN Wiedergabe eines aufgezeichneten Sample EINGANGSSCHLEIFEN-SAMPLERLöschen eines aufgezeichneten Sample Effektfunktionen EINGANGSSCHLEIFEN-SAMPLEREffektfunktionen Effektparameter EffektparameterBezeichnung Parameter 1 BEAT-Taste FunktionStörung Mögliche Ursache Abhilfemaßnahme StörungsbeseitigungStörungsbeseitigung Importante Avvertenze PER L’USOPosizionamento Pulizia dell’apparecchioPrima DELL’USO CaratteristicheOperazioni Altri DatiPannello DEL Collegamenti CollegamentiPannello posteriore Pannello anterioreCollegamenti DI Uscita Collegamento Degli IngressiCollegamento DEL Cavo DI Alimentazione ItalianoNome Delle Varie Parti E Loro Funzione Nome Delle Varie Parti E Loro FunzioneSelettore d’ingresso del canale Manopola di regolazione TrimPulsante/indicatore di effetto ON/OFF Indicatori del livello di uscita principalePulsante/indicatore della modalità di misurazione BPM Auto Selettore di effetti DELAY/ECHO/FILTEROperazioni DI Base Operazioni COL MixerOperazioni COL Mixer Funzione DI Inizio Della Dissolvenza Inizio della riproduzione con la dissolvenza incrociataInizio della riproduzione con la dissolvenza dei canali Funzioni DI Effetto Tipi DI Effetti Ritmici Funzioni DI EffettoTipi DI Effetti Ritmici Campionatore DI Cicli Produzione DI Effetti DI RitmoGirando la manopola LEVEL/DEPTH si regola il parametro Quantitativo dell’effetto sceltoRiproduzione di un campione registrato Cancellazione di un campioneParametri Degli Effetti Problema Causa possibile Rimedio DiagnosticaFunzioni DI Effetto Parametri Degli Effetti / Diagnostica Waarschuwingen I.V.M. HET Gebruik InstallatieplekBelangrijk Het toestel schoonmakenKenmerken InhoudsopgaveVoor Gebruik BedieningAchterpaneel Voorpaneel OP DE Ingangen Aansluiten VAN ApparatuurAansluiten VAN Apparatuur OP DE Uitgangen Aansluiten VAN HET NetsnoerBenaming EN Functie VAN DE Bedieningsorganen BPM meetmethodetoets/indicator Auto Hoofdniveau-indicators Master LevelEffecttoets/indicator ON/OFF Hoofduitvoer-niveauregelaar Master LevelBasisbediening Bediening VAN HET MengpaneelKiezen van de kruisfadercurve FaderstartfunctieGebruik van de kruisfader om te starten met afspelen Gebruik van de kanaalfader om te starten met afspelenEffectfuncties Typen BEAT-EFFECTEN EffectfunctiesTypen BEAT-EFFECTEN Effectfuncties BEAT-EFFECTEN PRODUCEREN/IN-LOOP Sampler BEAT-EFFECTEN ProducerenZet de ON/OFF toets op on om het gekozen effect in te SchakelenWeergeven van een opgenomen sample EffectparametersWissen van een opgenomen sample Effectfuncties IN-LOOP SAMPLER/EFFECTPARAMETERSEffectfuncties Effectparameters / Verhelpen VAN Storingen Verhelpen VAN StoringenStoring Mogelijke oorzaak Maatregelen LevelSituación Precauciones Para LA ManipulaciónLimpieza de la unidad AdvertenciaEspecificaciones ÍndiceCaracterísticas ÑolPanel DE Conexiones ConexionesPanel posterior Panel frontalEspañol Conexiones DE LAS EntradasConexiones DE Salida Nomenclatura Y Funciones DE LOS Controles Nomenclatura Y Funciones DE LOS ControlesSelector de entrada del canal Control de ajuste del nivel de entrada TrimIndicadores del nivel principal Master Level Control deslizante de fundido cruzadoControl del nivel de salida principal Master Level Sección de efectos de compás Visualizador del valor de BPMOperaciones Básicas Operaciones DE LA Consola DE MezclaEmpleo del fundido de canales para iniciar la reproducción Función DE Inicio CON FundidoEmpleo del fundido cruzado para iniciar la reproducción Funciones DE LOS Efectos Tipos DE Efectos DE Compás Funciones DE LOS EfectosTipos DE Efectos DE Compás Entrada manual de BPM empleando el botón TAP Producción DE Efectos DE CompásEntrada manual de BPM empleando los botones BEAT/PITCHPara reproducir una muestra grabada Parámetros DE LOS EfectosBorrado de una muestra grabada BEAT/BANKSíntoma Causa posible Solución Solución DE ProblemasDSP

DJM-400 specifications

The Pioneer DJM-400 mixer is a compact yet powerful addition to any DJ's setup, designed to blend professional capabilities with ease of use. As a two-channel mixer, it provides a perfect balance between features and simplicity, making it ideal for both beginner and experienced DJs.

One of the standout features of the DJM-400 is its high-quality sound output. The mixer is equipped with 48 kHz/24-bit digital signal processing, ensuring crystal-clear audio quality. This level of fidelity is crucial for DJs who want to deliver a party experience that is both immersive and engaging.

The DJM-400 includes a built-in sound card for seamless digital connectivity. This allows DJs to connect to a computer or laptop easily, enabling them to use software like Serato or Traktor. The mixer supports multiple formats and offers USB connectivity, which means it can also be used with a wide variety of devices. Its plug-and-play design minimizes setup time, letting DJs focus on their performance rather than technical issues.

Another noteworthy characteristic is the integrated digital effects processor. The DJM-400 features a range of built-in effects, including delay, echo, and flanger, which can be applied to individual channels, allowing DJs to add depth and dimension to their mixes. The effects can be manipulated using intuitive controls, making it easy to create unique sounds on the fly.

The layout of the DJM-400 has been thoughtfully designed to facilitate quick and easy adjustments. The EQ section features three-band equalizers for each channel, allowing precise control over bass, midrange, and treble frequencies. This empowers DJs to tailor their sound according to the venue and crowd.

Moreover, the DJM-400 comes with a crossfader that is exceptionally smooth, enabling seamless transitions between tracks. The fader is also replaceable, ensuring longevity and catering to individual preferences in performance style.

In summary, the Pioneer DJM-400 is a highly capable mixer that combines excellent sound quality, advanced technology, and user-friendly design. The inclusion of a built-in sound card, a suite of digital effects, and an intuitive layout makes it a versatile choice for DJs of all skill levels. Whether you're just starting your DJ journey or you're a seasoned professional, the DJM-400 delivers the features needed to elevate your performances and connect with your audience.