Pioneer DJM-400 operating instructions Names and Functions of Parts, Fader Start

NAMES AND FUNCTIONS OF PARTS
NAMES AND FUNCTIONS OF PARTS
		1					2
									POWER			6 Channel equalizer low-range adjust
MIC									MASTER		13		dial (LOW)
												Use to adjust the bass (low-range) frequency sound
MIC 1 LEVEL		CD 1	PHONO 1			CD 2	PHONO 2		LEVEL
			/LINE 1				/LINE 2					for each channel (includes kill function). (Adjustable
24		TRIM					TRIM				14
		3		2 CHANNEL DJ MIXER			3					range: –∞to +9 dB)
	0									0		7	Channel level indicators
MIC 2 LEVEL			+ 9				+ 9		BEAT EFFECTS			Display the current level for each channel, with 0.6
											15
25		HI	4		MASTER	4	HI			BPM		second peak hold.
					LEVEL							8	Channel fader levers
EQ	0		+ 9				+ 9	1	1 2	AUTO	16	Use to adjust sound volumes for each channel.
				OVER	OVER
26		MID	5	4	4	5 MID				TAP		(Adjustable range: –∞to 0 dB)
		EQ		2	2		EQ	2	3 4		17	9	Channel 1 fader start button/indicator
				0	0
LOW	HI			-2	-2			4	1 1				(FADER START)
MIC		LOW	+ 9	-4	-4		+ 9	8	2 1	ERASE		Pressing this button toggles ON/OFF, the fader start/
			6			6 LOW
										BEAT PITCH
27				-10	-10						18	back cue function for the DJ CD player connected to
OFF ON TALK				dB	dB			16	4 1			channel 1. The button lights when set to ON. When
OVER					7							set to ON, the operation differs depending on the
			+ 9				+ 9	BEAT BANK			19
												setting of the cross fader selector switch.
									FLANGER	PHASER		¶ When the cross fader selector switch is at the left
									FILTER	ROBOT	20		(THRU) position, the function is linked to the
									ECHO	ROLL
			10			10			DELAY	IN-LOOP			operation of the channel fader lever (not linked to
			9			9				SAMPLER
HEADPHONES			8			8							cross fader).
CH-1 CH-2	MASTER		7	8	8	7			CH. SELECT				When the cross fader selector switch is at the
			5			5			1	MASTER		¶
			6			6			2	MIC
			4			4					21		middle (	) or right (	) position, the function is
28			3			3							linked to the cross fader lever (not linked to
			2			2
			1			1			LEVEL/DEPTH				channel fader).
LEVEL			0			0						10	Channel 2 fader start button/
		START					START
29		FADER					FADER				22
		9				11	10						indicator (FADER START)
	0			THRU					MIN	MAX		Pressing this button toggles ON/OFF, the fader start/
									ON/OFF			back cue function for the DJ CD player connected to
											23
												channel 2. The button lights when set to ON. When
												set to ON, the operation differs depending on the
												setting of the cross fader selector switch.
PHONES												¶ When the cross fader selector switch is at the left
													(THRU) position, the function is linked to the
30					12								operation of the channel fader lever (not linked to
													cross fader).
1 Channel 1 input selector switch										¶ When the cross fader selector switch is at the middle (						) or right
										(	) position, the function is linked to the cross fader lever (not
CD 1:										linked to channel fader).

The CD input connectors (line level input) are selected.	11 Cross fader selector switch
PHONO 1/LINE 1:	Select whether or not to use the cross fader, and to select from two
PHONO/LINE input connectors are selected.	types of curve response.
¶ The connection panel’s PHONO/LINE switch is used to switch the	¶ When the switch is set to left (THRU) position, the cross fader is
function of the channel 1 connectors between phonograph input	disabled, and the channel fader output is mixed without passing
(analog turntable input) and line input (line level input).	through the cross fader.
2 Channel 2 input selector switch	¶ When this switch is set to the center ( ) position, the cross fader
CD 2:	is enabled, and a slowly rising curve response is selected.
	¶ When set to the right position ( ), the cross fader is enabled, and
The CD input connectors (line level input) are selected.
	a rapidly rising curve response is selected (as soon as the lever
PHONO 2/LINE 2:
	leaves the [< 1] side, the [2 >] sound is heard).
PHONO/LINE input connectors are selected.
	12 Cross fader lever
¶ The connection panel’s PHONO/LINE switch is used to switch the
function of the channel 2 connectors between phonograph input	Outputs channel 1 and channel 2 sounds in accordance with cross
(analog turntable input) and line input (line level input).	fader curve response selected with the cross fader selector switch.
3 TRIM adjust dial	The cross fader function is disabled when the cross fader selector
	switch is set to the [THRU] position.
Use to adjust the input level for each channel. (Adjustable range: –∞
	13 Master level indicators (MASTER LEVEL)
to +9 dB, mid-position is about 0 dB)
4 Channel equalizer high-range adjust dial (HI)	These indicators show the master output level in a monaural display.
	Each indicator has a 0.6 second peak hold.
Use to adjust the treble (high-range) frequency sound for each
	14 Master output level dial (MASTER LEVEL)
channel (includes kill function). (Adjustable range: –∞to +9 dB)
5 Channel equalizer mid-range adjust dial (MID)	Use to adjust the master output level. (adjustable range: –∞to 0 dB)

Use to adjust the mid-range frequency sound for each channel (includes kill function). (Adjustable range: –∞to +9 dB)

6

<DRB1404> En