Pioneer DJM-400 operating instructions Mixer Operations, Basic Operations

Page 8

MIXER OPERATIONS (BASIC OPERATIONS)

MIXER OPERATIONS

BASIC OPERATIONS

[MIC]

[AUX]

MIC/AUX 1

STEREO/MONO

2

3

TRIM

4

HI, MID,

LOW

MIC

1POWER

MASTER

 

7

BEAT EFFECTS

MASTER

LEVEL

 

3

MIC 1 LEVEL, MIC 2 LEVEL

4

EQ

2

[PHONES]

1

CH-1, CH-2,

MIC

MASTER

 

BEAT EFFECTS

HEADPHONES

HEADPHONES

5

6

MASTER

2

LEVEL

THRU/ /

(Cross fader selector switch)

1.Set rear panel POWER switch to ON.

2.Set the input selector switch for the desired channel to choose the connected component.

The function of the PHONO/LINE input connectors is set using the PHONO/LINE switch on the connection panel.

3.Use the TRIM dial to adjust the input level.

4.Use the channel equalizer dials (HI, MID, LOW) to adjust the tone.

5.Use the channel fader lever to adjust the sound volume of the selected channel.

6.To use the cross fader on the selected channel, set the cross fader selector switch to either the middle position () or the right position (), then operate the cross fader lever.

When not using the cross fader, set the cross fader selector switch to [THRU].

7.Use the MASTER LEVEL dial to adjust the overall sound volume.

[Selecting Stereo or Monaural]

When the connection panel’s STEREO/MONO switch is set to [MONO], the master output becomes a monaural combination of L+R channels.

[Microphone Input]

1.Set the connection panel’s MIC/AUX switch to [MIC].

2.Set the MIC switch to [ON] or [TALK OVER].

When the switch is set to [TALK OVER], if sounds of over –15 dB are detected by the microphone, the output for all sound sources other than the microphone is attenuated by 20 dB.

3.Use the MIC 1 LEVEL dial to adjust the sound volume of MIC 1, and the MIC 2 LEVEL dial to adjust the sound volume of MIC 2.

4.Use the microphone equalizer dial (EQ) to adjust the tone of the microphone sound.

The microphone equalizer function operates simultaneously on microphones 1 and 2.

8

<DRB1404> En

[Auxiliary Input]

1.Set the connection panel’s MIC/AUX switch to [AUX].

The MIC1 input connector functions as AUX(L) input, and the MIC2 input connector functions as AUX(R) input.

2.Set the MIC switch to [ON] or [TALK OVER].

When the switch is set to [TALK OVER], if a sound is input to the AUX connectors, the output for all sources other than the AUX input is attenuated by 20 dB.

3.Use the MIC 1 LEVEL dial to adjust the sound from the L channel, and MIC 2 LEVEL dial to adjust the sound from the R channel.

4.Use the microphone equalizer dial (EQ) to adjust sound tone.

[Headphones Output]

1. Use the headphones cue button (CH-1, CH-2, MASTER) to select the source to be output to the headphones.

The selected source button lights brightly.

[Relationship of headphones cue button and headphones output]

Headphone cue button

Headphones Output

CH-1

CH-2

MASTER

L channel

R channel

ON

OFF

OFF

CH-1(L)

CH-1(R)

OFF

ON

OFF

CH-2(L)

CH-2(R)

OFF

OFF

ON

MASTER(L)

MASTER(R)

ON

ON

OFF

CH-1(L)+CH-2(L)

CH-1(R)+CH-2(R)

ON

OFF

ON

CH-1(MONO)

MASTER(MONO)

OFF

ON

ON

CH-2(MONO)

MASTER(MONO)

ON

ON

ON

CH-1(MONO)+CH-2(MONO)

MASTER(MONO)

 

 

 

 

 

2. Use the LEVEL dial to adjust the headphones sound level.

[Selecting the Cross Fader Curve]

The sound volume response to fader lever operation can be set to

one of two characteristic curves.

7Use the cross fader selector switch to select the desired cross fader response curve.

At the center position (), the curve operates to produce an even, neutral rise throughout the cross fader’s movement.

At the right position (), the curve operates to produce a rapid rise with the cross fader’s movement (sound from [2 >] is produced as soon as the lever leaves side [< 1]).

The curve settings operate the same on both sides [< 1] and [2 >].

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DJM-400 Cleaning the Unit POWER-CORD CautionLocation Important the Moulded PlugContents FeaturesConnections Connection PanelRear panel Front panelConnecting Inputs Connecting OutputsConnecting the Power Cord EnglishFader Start Names and Functions of PartsNames and Functions of Parts Bank CH. Select 1/2/MIC/MASTERMixer Operations Basic OperationsUsing the Cross Fader to Start Playback Using the Channel Fader to Start PlaybackFader Start Function Mixer Operations Fader Start FunctionEffect Functions Types of Beat EffectsUsing the TAP Button for Manual BPM Input Using the BEAT/PITCH buttons for Manual BPM InputProducing Beat Effects IN-LOOP SamplerEffect Parameters To Playback a Recorded SampleErasing a Recorded Sample Effect Functions IN-LOOP SAMPLER/EFFECT ParametersTroubleshooting TroubleshootingSymptom Possible Cause Remedy ThruEmplacement Avertissements Concernant L’USAGENettoyer l’appareil AvertissementTable DES Matières CaractéristiquesAvant L’UTILISATION UtilisationBranchements Panneau DE ConnexionPanneau arrière Panneau avantFrançais Branchement DES EntréesBranchements DE Sortie Noms ET Fonctions DES Organes Noms ET Fonctions DES OrganesDELAY/ECHO/FILTER/FLANGER/PHASER ROBOT/ROLL/IN-LOOP Sampler Master LevelUtilisation DU Mixeur Démarches DE BaseFonction DE Départ EN Fondu Sélection de la courbe de fondu croiséLancement de la lecture par fondu croisé Lancement de la lecture par fondu de canalFonctions DES Effets Types D’EFFETS DE Battement Fonctions DES EffetsTypes D’EFFETS DE Battement Utilisation du bouton TAP pour une saisie BPM manuelle Production D’EFFETS DE BattementÉchantillonneur D’ENTRÉE DE Boucle Effacement d’un échantillon enregistré Paramètres DES EffetsLecture d’un échantillon enregistré Symptômes Causes possibles Corrections Master LevelVorsichtshinweise ZUR Handhabung WichtigAufstellung Reinigen des GerätesMerkmale InhaltsverzeichnisTechnische Daten Anschlüsse AnschlüsseRückwand Frontplatte Anschlüsse AN DEN Eingangsbuchsen DeutschAnschlüsse AN DEN Ausgangsbuchsen Anschliessen DES NetzkabelsMaster-Ausgang KopfhörerBezeichnung UND Funktion DER Bedienelemente FLANGER/PHASER/ROBOT/ROLL/IN-LOOP Sampler Bedienung DES Mischpults Grundlegende BedienungsverfahrenFADER-STARTFUNKTION Starten der Wiedergabe über Kanal-FaderhebelBedienung DES Mischpults FADER-STARTFUNKTION Wiedergabestart und Cue-Rücklauf über Kreuz-FaderhebelEffektfunktionen BEAT-EFFEKTTYPEN EffektfunktionenBEAT-EFFEKTTYPEN Gebrauch der TAP-Taste für manuelle Eingabe des BPM-Wertes Erzeugen VON BEAT-EFFEKTENEffektfunktionen Erzeugen VON BEAT-EFFEKTEN EINGANGSSCHLEIFEN-SAMPLER Wiedergabe eines aufgezeichneten SampleLöschen eines aufgezeichneten Sample Effektfunktionen EINGANGSSCHLEIFEN-SAMPLEREffektparameter Effektfunktionen EffektparameterBezeichnung Parameter 1 BEAT-Taste FunktionStörung Mögliche Ursache Abhilfemaßnahme StörungsbeseitigungStörungsbeseitigung Avvertenze PER L’USO ImportantePosizionamento Pulizia dell’apparecchioCaratteristiche Prima DELL’USOOperazioni Altri DatiCollegamenti Pannello DEL CollegamentiPannello posteriore Pannello anterioreCollegamento Degli Ingressi Collegamenti DI UscitaCollegamento DEL Cavo DI Alimentazione ItalianoNome Delle Varie Parti E Loro Funzione Nome Delle Varie Parti E Loro FunzioneSelettore d’ingresso del canale Manopola di regolazione TrimIndicatori del livello di uscita principale Pulsante/indicatore di effetto ON/OFFPulsante/indicatore della modalità di misurazione BPM Auto Selettore di effetti DELAY/ECHO/FILTEROperazioni COL Mixer Operazioni DI BaseOperazioni COL Mixer Funzione DI Inizio Della Dissolvenza Inizio della riproduzione con la dissolvenza incrociataInizio della riproduzione con la dissolvenza dei canali Funzioni DI Effetto Tipi DI Effetti Ritmici Funzioni DI EffettoTipi DI Effetti Ritmici Produzione DI Effetti DI Ritmo Campionatore DI CicliGirando la manopola LEVEL/DEPTH si regola il parametro Quantitativo dell’effetto sceltoRiproduzione di un campione registrato Cancellazione di un campioneParametri Degli Effetti Problema Causa possibile Rimedio DiagnosticaFunzioni DI Effetto Parametri Degli Effetti / Diagnostica Installatieplek Waarschuwingen I.V.M. HET GebruikBelangrijk Het toestel schoonmakenInhoudsopgave KenmerkenVoor Gebruik BedieningAchterpaneel Voorpaneel Aansluiten VAN Apparatuur OP DE IngangenAansluiten VAN Apparatuur OP DE Uitgangen Aansluiten VAN HET NetsnoerBenaming EN Functie VAN DE Bedieningsorganen Hoofdniveau-indicators Master Level BPM meetmethodetoets/indicator AutoEffecttoets/indicator ON/OFF Hoofduitvoer-niveauregelaar Master LevelBediening VAN HET Mengpaneel BasisbedieningFaderstartfunctie Kiezen van de kruisfadercurveGebruik van de kruisfader om te starten met afspelen Gebruik van de kanaalfader om te starten met afspelenEffectfuncties Typen BEAT-EFFECTEN EffectfunctiesTypen BEAT-EFFECTEN BEAT-EFFECTEN Produceren Effectfuncties BEAT-EFFECTEN PRODUCEREN/IN-LOOP SamplerZet de ON/OFF toets op on om het gekozen effect in te SchakelenEffectparameters Weergeven van een opgenomen sampleWissen van een opgenomen sample Effectfuncties IN-LOOP SAMPLER/EFFECTPARAMETERSVerhelpen VAN Storingen Effectfuncties Effectparameters / Verhelpen VAN StoringenStoring Mogelijke oorzaak Maatregelen LevelPrecauciones Para LA Manipulación SituaciónLimpieza de la unidad AdvertenciaÍndice EspecificacionesCaracterísticas ÑolConexiones Panel DE ConexionesPanel posterior Panel frontalEspañol Conexiones DE LAS EntradasConexiones DE Salida Nomenclatura Y Funciones DE LOS Controles Nomenclatura Y Funciones DE LOS ControlesSelector de entrada del canal Control de ajuste del nivel de entrada TrimControl deslizante de fundido cruzado Indicadores del nivel principal Master LevelControl del nivel de salida principal Master Level Sección de efectos de compás Visualizador del valor de BPMOperaciones DE LA Consola DE Mezcla Operaciones BásicasEmpleo del fundido de canales para iniciar la reproducción Función DE Inicio CON FundidoEmpleo del fundido cruzado para iniciar la reproducción Funciones DE LOS Efectos Tipos DE Efectos DE Compás Funciones DE LOS EfectosTipos DE Efectos DE Compás Producción DE Efectos DE Compás Entrada manual de BPM empleando el botón TAPEntrada manual de BPM empleando los botones BEAT/PITCHParámetros DE LOS Efectos Para reproducir una muestra grabadaBorrado de una muestra grabada BEAT/BANKSolución DE Problemas Síntoma Causa posible SoluciónDSP

DJM-400 specifications

The Pioneer DJM-400 mixer is a compact yet powerful addition to any DJ's setup, designed to blend professional capabilities with ease of use. As a two-channel mixer, it provides a perfect balance between features and simplicity, making it ideal for both beginner and experienced DJs.

One of the standout features of the DJM-400 is its high-quality sound output. The mixer is equipped with 48 kHz/24-bit digital signal processing, ensuring crystal-clear audio quality. This level of fidelity is crucial for DJs who want to deliver a party experience that is both immersive and engaging.

The DJM-400 includes a built-in sound card for seamless digital connectivity. This allows DJs to connect to a computer or laptop easily, enabling them to use software like Serato or Traktor. The mixer supports multiple formats and offers USB connectivity, which means it can also be used with a wide variety of devices. Its plug-and-play design minimizes setup time, letting DJs focus on their performance rather than technical issues.

Another noteworthy characteristic is the integrated digital effects processor. The DJM-400 features a range of built-in effects, including delay, echo, and flanger, which can be applied to individual channels, allowing DJs to add depth and dimension to their mixes. The effects can be manipulated using intuitive controls, making it easy to create unique sounds on the fly.

The layout of the DJM-400 has been thoughtfully designed to facilitate quick and easy adjustments. The EQ section features three-band equalizers for each channel, allowing precise control over bass, midrange, and treble frequencies. This empowers DJs to tailor their sound according to the venue and crowd.

Moreover, the DJM-400 comes with a crossfader that is exceptionally smooth, enabling seamless transitions between tracks. The fader is also replaceable, ensuring longevity and catering to individual preferences in performance style.

In summary, the Pioneer DJM-400 is a highly capable mixer that combines excellent sound quality, advanced technology, and user-friendly design. The inclusion of a built-in sound card, a suite of digital effects, and an intuitive layout makes it a versatile choice for DJs of all skill levels. Whether you're just starting your DJ journey or you're a seasoned professional, the DJM-400 delivers the features needed to elevate your performances and connect with your audience.
Top Page Image Contents