Pioneer DJM-400 operating instructions Bank, CH. Select 1/2/MIC/MASTER

Page 7

NAMES AND FUNCTIONS OF PARTS

Beat effect section

15 BPM display

Displays the current track tempo as Beats Per Minute (BPM).

The display flashes during BPM calculation and when BPM cannot be calculated.

16 BPM measuring mode button/indicator (AUTO)

Each time the button is pressed, the BPM measuring mode alternates as follows:

AUTO mode:

The AUTO button lights and the BPM is calculated automatically. This is the default mode whenever power is first turned on.

TAP mode (manual input):

The AUTO button does not light, and BPM is input manually by using the TAP button.

17 TAP button

The BPM is calculated from the intervals at which the TAP button is struck. If the TAP button is tapped in the AUTO mode, the mode automatically switches to the TAP mode (manual input).

18 Beat select buttons (BEAT/PITCH –, +)

+ (Beat up): Doubles the calculated BPM.

(Beat down): Halves the calculated BPM.

If one of the BEAT/PITCH buttons (, +) is pressed while holding the TAP button depressed, the BPM can be changed (40 to 999, in 1-step increments).

During in-loop sampler play, the loop play speed is changed.

+ (Beat up): Play speed becomes faster while button is pressed.

(Beat down): Play speed becomes slower while button is pressed.

26 Microphone equalizer control dial (EQ)

Use to adjust the tone of microphones 1 and 2. When rotated fully clockwise, attenuation of low-range sound is maximized. When rotated fully counterclockwise, attenuation of high-range sound is maximized. (Adjustable range 0 dB to –12 dB)

27 Microphone function selector switch (MIC)

OFF:

No microphone sound is output.

ON:

Microphone sound is output normally.

TALK OVER:

Microphone sound is output; when sound is input to a connected microphone, the TALK OVER function operates and all sound other than that from the microphone is attenuated by 20 dB.

Headphones output section

28 Headphone cue button/indicator (CH-1, CH-2, MASTER)

Press the button for the source you wish to monitor with headphones. When a button is OFF, its indicator lights dimly; when ON, the button indicator lights brightly (P. 8).

When the [ECHO] effect is selected, the effect is not applied to headphone outputs if headphone cue button CH-1or CH-2are set to ON.

29 Headphones level adjust dial (LEVEL)

Adjusts the output level of the headphones jack. (Adjustable range:

to 0 dB).

English

19Beat select/bank buttons/indicators

(BEAT 1 (1/2), 2 (3/4), 4 (1/1), 8 (2/1), 16 (4/1) /

BANK)

Use to select the beat for synchronizing effects (P.11) The selected button lights.

During in-loop sampler play, the buttons function as bank buttons to record samples of the music (P. 12).

If the BEAT/BANK button is pressed while holding the ERASE (BEAT/PITCH –)button depressed, the music sample recorded in the BEAT/BANK button will be erased.

30 Headphones jack (PHONES)

Located on the unit’s front panel.

20 Effect selector (DELAY/ECHO/FILTER/FLANGER/ PHASER/ROBOT/ROLL/IN-LOOP SAMPLER)

Use to select desired type of effect (P. 10 to 12).

21 Effect channel selector

(CH. SELECT 1/2/MIC/MASTER)

Use to select the channel to which beat effects are applied (P. 11). When [MIC] is selected, effects are applied to both microphone 1 and microphone 2.

22 Effect parameter dial (LEVEL/DEPTH)

Adjusts the quantitative parameters for selected beat effect (P. 11 to 12)

23 Effect button/indicator (ON/OFF)

Sets selected beat effects ON/OFF (P. 11).

When effects are disabled (OFF), the button lights. When effects are enabled (ON), the button flashes. Whenever power is first turned ON, effects default to OFF.

Microphone input control

24 Microphone 1 level control dial (MIC 1 LEVEL)

Use to adjust the volume of microphone 1. (Adjustable range to 0 dB)

When the connection panel’s MIC/AUX switch is set to [AUX], this

dial adjusts the sound volume for the left channel (AUX(L)).

25 Microphone 2 level control dial (MIC 2 LEVEL)

Use to adjust the volume of microphone 2. (Adjustable range to 0

dB)

When the connection panel’s MIC/AUX switch is set to [AUX], this dial adjusts the sound volume for the right channel (AUX(R)).

7

<DRB1404> En

Image 7
Contents DJM-400 Important the Moulded Plug Cleaning the UnitPOWER-CORD Caution LocationFeatures ContentsFront panel ConnectionsConnection Panel Rear panelEnglish Connecting InputsConnecting Outputs Connecting the Power CordNames and Functions of Parts Names and Functions of PartsFader Start CH. Select 1/2/MIC/MASTER BankBasic Operations Mixer OperationsMixer Operations Fader Start Function Using the Cross Fader to Start PlaybackUsing the Channel Fader to Start Playback Fader Start FunctionTypes of Beat Effects Effect FunctionsIN-LOOP Sampler Using the TAP Button for Manual BPM InputUsing the BEAT/PITCH buttons for Manual BPM Input Producing Beat EffectsEffect Functions IN-LOOP SAMPLER/EFFECT Parameters Effect ParametersTo Playback a Recorded Sample Erasing a Recorded SampleThru TroubleshootingTroubleshooting Symptom Possible Cause RemedyAvertissement EmplacementAvertissements Concernant L’USAGE Nettoyer l’appareilUtilisation Table DES MatièresCaractéristiques Avant L’UTILISATIONPanneau avant BranchementsPanneau DE Connexion Panneau arrièreBranchements DE Sortie Branchement DES EntréesFrançais Noms ET Fonctions DES Organes Noms ET Fonctions DES OrganesMaster Level DELAY/ECHO/FILTER/FLANGER/PHASER ROBOT/ROLL/IN-LOOP SamplerDémarches DE Base Utilisation DU MixeurLancement de la lecture par fondu de canal Fonction DE Départ EN FonduSélection de la courbe de fondu croisé Lancement de la lecture par fondu croiséTypes D’EFFETS DE Battement Fonctions DES EffetsFonctions DES Effets Types D’EFFETS DE Battement Échantillonneur D’ENTRÉE DE Boucle Production D’EFFETS DE BattementUtilisation du bouton TAP pour une saisie BPM manuelle Lecture d’un échantillon enregistré Paramètres DES EffetsEffacement d’un échantillon enregistré Master Level Symptômes Causes possibles CorrectionsReinigen des Gerätes Vorsichtshinweise ZUR HandhabungWichtig AufstellungTechnische Daten InhaltsverzeichnisMerkmale Rückwand Frontplatte AnschlüsseAnschlüsse Deutsch Anschlüsse AN DEN EingangsbuchsenKopfhörer Anschlüsse AN DEN AusgangsbuchsenAnschliessen DES Netzkabels Master-AusgangBezeichnung UND Funktion DER Bedienelemente FLANGER/PHASER/ROBOT/ROLL/IN-LOOP Sampler Grundlegende Bedienungsverfahren Bedienung DES MischpultsWiedergabestart und Cue-Rücklauf über Kreuz-Faderhebel FADER-STARTFUNKTIONStarten der Wiedergabe über Kanal-Faderhebel Bedienung DES Mischpults FADER-STARTFUNKTIONBEAT-EFFEKTTYPEN EffektfunktionenEffektfunktionen BEAT-EFFEKTTYPEN Effektfunktionen Erzeugen VON BEAT-EFFEKTEN Erzeugen VON BEAT-EFFEKTENGebrauch der TAP-Taste für manuelle Eingabe des BPM-Wertes Effektfunktionen EINGANGSSCHLEIFEN-SAMPLER EINGANGSSCHLEIFEN-SAMPLERWiedergabe eines aufgezeichneten Sample Löschen eines aufgezeichneten SampleParameter 1 BEAT-Taste Funktion EffektparameterEffektfunktionen Effektparameter BezeichnungStörungsbeseitigung StörungsbeseitigungStörung Mögliche Ursache Abhilfemaßnahme Pulizia dell’apparecchio Avvertenze PER L’USOImportante PosizionamentoAltri Dati CaratteristichePrima DELL’USO OperazioniPannello anteriore CollegamentiPannello DEL Collegamenti Pannello posterioreItaliano Collegamento Degli IngressiCollegamenti DI Uscita Collegamento DEL Cavo DI AlimentazioneManopola di regolazione Trim Nome Delle Varie Parti E Loro FunzioneNome Delle Varie Parti E Loro Funzione Selettore d’ingresso del canaleSelettore di effetti DELAY/ECHO/FILTER Indicatori del livello di uscita principalePulsante/indicatore di effetto ON/OFF Pulsante/indicatore della modalità di misurazione BPM AutoOperazioni DI Base Operazioni COL MixerInizio della riproduzione con la dissolvenza dei canali Inizio della riproduzione con la dissolvenza incrociataOperazioni COL Mixer Funzione DI Inizio Della Dissolvenza Tipi DI Effetti Ritmici Funzioni DI EffettoFunzioni DI Effetto Tipi DI Effetti Ritmici Quantitativo dell’effetto scelto Produzione DI Effetti DI RitmoCampionatore DI Cicli Girando la manopola LEVEL/DEPTH si regola il parametroParametri Degli Effetti Cancellazione di un campioneRiproduzione di un campione registrato Funzioni DI Effetto Parametri Degli Effetti / Diagnostica DiagnosticaProblema Causa possibile Rimedio Het toestel schoonmaken InstallatieplekWaarschuwingen I.V.M. HET Gebruik BelangrijkBediening InhoudsopgaveKenmerken Voor GebruikAchterpaneel Voorpaneel Aansluiten VAN HET Netsnoer Aansluiten VAN ApparatuurOP DE Ingangen Aansluiten VAN Apparatuur OP DE UitgangenBenaming EN Functie VAN DE Bedieningsorganen Hoofduitvoer-niveauregelaar Master Level Hoofdniveau-indicators Master LevelBPM meetmethodetoets/indicator Auto Effecttoets/indicator ON/OFFBasisbediening Bediening VAN HET MengpaneelGebruik van de kanaalfader om te starten met afspelen FaderstartfunctieKiezen van de kruisfadercurve Gebruik van de kruisfader om te starten met afspelenTypen BEAT-EFFECTEN EffectfunctiesEffectfuncties Typen BEAT-EFFECTEN Schakelen BEAT-EFFECTEN ProducerenEffectfuncties BEAT-EFFECTEN PRODUCEREN/IN-LOOP Sampler Zet de ON/OFF toets op on om het gekozen effect in teEffectfuncties IN-LOOP SAMPLER/EFFECTPARAMETERS EffectparametersWeergeven van een opgenomen sample Wissen van een opgenomen sampleLevel Verhelpen VAN StoringenEffectfuncties Effectparameters / Verhelpen VAN Storingen Storing Mogelijke oorzaak MaatregelenAdvertencia Precauciones Para LA ManipulaciónSituación Limpieza de la unidadÑol ÍndiceEspecificaciones CaracterísticasPanel frontal ConexionesPanel DE Conexiones Panel posteriorConexiones DE Salida Conexiones DE LAS EntradasEspañol Control de ajuste del nivel de entrada Trim Nomenclatura Y Funciones DE LOS ControlesNomenclatura Y Funciones DE LOS Controles Selector de entrada del canalSección de efectos de compás Visualizador del valor de BPM Control deslizante de fundido cruzadoIndicadores del nivel principal Master Level Control del nivel de salida principal Master LevelOperaciones Básicas Operaciones DE LA Consola DE MezclaEmpleo del fundido cruzado para iniciar la reproducción Función DE Inicio CON FundidoEmpleo del fundido de canales para iniciar la reproducción Tipos DE Efectos DE Compás Funciones DE LOS EfectosFunciones DE LOS Efectos Tipos DE Efectos DE Compás BEAT/PITCH Producción DE Efectos DE CompásEntrada manual de BPM empleando el botón TAP Entrada manual de BPM empleando los botonesBEAT/BANK Parámetros DE LOS EfectosPara reproducir una muestra grabada Borrado de una muestra grabadaSíntoma Causa posible Solución Solución DE ProblemasDSP

DJM-400 specifications

The Pioneer DJM-400 mixer is a compact yet powerful addition to any DJ's setup, designed to blend professional capabilities with ease of use. As a two-channel mixer, it provides a perfect balance between features and simplicity, making it ideal for both beginner and experienced DJs.

One of the standout features of the DJM-400 is its high-quality sound output. The mixer is equipped with 48 kHz/24-bit digital signal processing, ensuring crystal-clear audio quality. This level of fidelity is crucial for DJs who want to deliver a party experience that is both immersive and engaging.

The DJM-400 includes a built-in sound card for seamless digital connectivity. This allows DJs to connect to a computer or laptop easily, enabling them to use software like Serato or Traktor. The mixer supports multiple formats and offers USB connectivity, which means it can also be used with a wide variety of devices. Its plug-and-play design minimizes setup time, letting DJs focus on their performance rather than technical issues.

Another noteworthy characteristic is the integrated digital effects processor. The DJM-400 features a range of built-in effects, including delay, echo, and flanger, which can be applied to individual channels, allowing DJs to add depth and dimension to their mixes. The effects can be manipulated using intuitive controls, making it easy to create unique sounds on the fly.

The layout of the DJM-400 has been thoughtfully designed to facilitate quick and easy adjustments. The EQ section features three-band equalizers for each channel, allowing precise control over bass, midrange, and treble frequencies. This empowers DJs to tailor their sound according to the venue and crowd.

Moreover, the DJM-400 comes with a crossfader that is exceptionally smooth, enabling seamless transitions between tracks. The fader is also replaceable, ensuring longevity and catering to individual preferences in performance style.

In summary, the Pioneer DJM-400 is a highly capable mixer that combines excellent sound quality, advanced technology, and user-friendly design. The inclusion of a built-in sound card, a suite of digital effects, and an intuitive layout makes it a versatile choice for DJs of all skill levels. Whether you're just starting your DJ journey or you're a seasoned professional, the DJM-400 delivers the features needed to elevate your performances and connect with your audience.