Pioneer DJM-400 Fader Start Function, Using the Cross Fader to Start Playback

Page 9

MIXER OPERATIONS (FADER START FUNCTION)

FADER START FUNCTION

[Using the Cross Fader to Start Playback]

By connecting the optional Pioneer DJ CD Player control cable, the channel fader and cross fader can be used to start CD playback. When the mixer’s channel fader lever or cross fader lever are moved, the CD player is released from the pause mode and automatically – and instantly – begins playback of the selected track. Also, when the fader lever is returned to its original position, the CD player returns to its cue point (back cue), thus allowing “sampler” type play.

Cross fader start play and back cue play

When the CD player assigned to channel 1 is set to standby at a cue point, moving the cross fader lever from the right (2) side toward the left (1) side, automatically starts play on the channel 1 CD player.

When the cross fader lever reaches the left (1) side, the CD player assigned to channel 2 goes to back cue (returns to cue point). Also, when the CD player assigned to channel 2 is set to standby at a cue point, moving the cross fader lever from the left (1) side to the right (2) side, automatically starts playback on the channel 2 CD player. When the cross fader lever reaches the right (2) side, the channel 1 CD player goes to back cue (returns to cue point).

*The back cue is performed even if the input selector switch is not set to [CD].

[Using the Channel Fader to Start Playback]

MIC

2

FADER HEADPHONES

START (CH-2)

2

FADER START (CH-1)

THRU/ /

1

3 5

MASTER

BEAT EFFECTS

English

2

FADER START (CH-2)

3 5

2

FADER START (CH-1)

MIC

HEADPHONES

1 THRU/ /

MASTER

BEAT EFFECTS

1.Set the cross fader selector switch to the middle () or the right () position.

2.Press the FADER START button for the channel (1 to 2) connected to the CD player you wish to control.

The button for the selected channel lights.

3.Set the cross fader lever fully to the opposite side from the channel you wish to start.

4.Set the CD player to the desired cue point, and engage cue point standby.

If a cue point has already been set, it is not necessary to set the CD player to standby at the cue point.

5.At the instant you wish to start playback, move the cross fader lever.

CD player begins playback.

After playback has begun, if the cross fader lever is moved fully to the side opposite from its start, the CD player assigned to the opposite side channel will return to the cue point and enter standby mode (back cue).

*If the cross fader selector switch is set to [THRU], channel fader operation is enabled, and the cross fader cannot be used to control playback.

1.Set the cross fader selector switch to the left (THRU) position.

2.Press the FADER START button for the channel (1 to 2) connected to the CD player you wish to control.

The button for the selected channel lights.

3.Set the channel fader lever to its lowest position.

4.Set the CD player to the desired cue point, and engage cue point standby.

If a cue point has already been set, it is not necessary to set the CD player to standby at the cue point.

5.At the instant you wish to start playback, move the channel fader lever.

CD player begins playback.

After playback has begun, if the channel fader lever is returned to its minimum position, the CD player returns to the cue point and reenters standby mode (back cue).

*If the cross fader selector switch is set to a position other than [THRU], the cross fader control is enabled and channel fader cannot be used for control.

9

<DRB1404> En

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DJM-400 POWER-CORD Caution Cleaning the UnitLocation Important the Moulded PlugFeatures ContentsConnection Panel ConnectionsRear panel Front panelConnecting Outputs Connecting InputsConnecting the Power Cord English Names and Functions of Parts Names and Functions of Parts Fader Start CH. Select 1/2/MIC/MASTER BankBasic Operations Mixer OperationsUsing the Channel Fader to Start Playback Using the Cross Fader to Start PlaybackFader Start Function Mixer Operations Fader Start FunctionTypes of Beat Effects Effect FunctionsUsing the BEAT/PITCH buttons for Manual BPM Input Using the TAP Button for Manual BPM InputProducing Beat Effects IN-LOOP SamplerTo Playback a Recorded Sample Effect ParametersErasing a Recorded Sample Effect Functions IN-LOOP SAMPLER/EFFECT ParametersTroubleshooting TroubleshootingSymptom Possible Cause Remedy ThruAvertissements Concernant L’USAGE EmplacementNettoyer l’appareil AvertissementCaractéristiques Table DES MatièresAvant L’UTILISATION UtilisationPanneau DE Connexion BranchementsPanneau arrière Panneau avantBranchement DES Entrées Branchements DE SortieFrançais Noms ET Fonctions DES Organes Noms ET Fonctions DES OrganesMaster Level DELAY/ECHO/FILTER/FLANGER/PHASER ROBOT/ROLL/IN-LOOP SamplerDémarches DE Base Utilisation DU MixeurSélection de la courbe de fondu croisé Fonction DE Départ EN FonduLancement de la lecture par fondu croisé Lancement de la lecture par fondu de canalFonctions DES Effets Types D’EFFETS DE BattementFonctions DES Effets Types D’EFFETS DE Battement Production D’EFFETS DE Battement Échantillonneur D’ENTRÉE DE BoucleUtilisation du bouton TAP pour une saisie BPM manuelle Paramètres DES Effets Lecture d’un échantillon enregistréEffacement d’un échantillon enregistré Master Level Symptômes Causes possibles CorrectionsWichtig Vorsichtshinweise ZUR HandhabungAufstellung Reinigen des GerätesInhaltsverzeichnis Technische DatenMerkmale Anschlüsse Rückwand FrontplatteAnschlüsse Deutsch Anschlüsse AN DEN EingangsbuchsenAnschliessen DES Netzkabels Anschlüsse AN DEN AusgangsbuchsenMaster-Ausgang KopfhörerBezeichnung UND Funktion DER Bedienelemente FLANGER/PHASER/ROBOT/ROLL/IN-LOOP Sampler Grundlegende Bedienungsverfahren Bedienung DES MischpultsStarten der Wiedergabe über Kanal-Faderhebel FADER-STARTFUNKTIONBedienung DES Mischpults FADER-STARTFUNKTION Wiedergabestart und Cue-Rücklauf über Kreuz-FaderhebelEffektfunktionen BEAT-EFFEKTTYPENEffektfunktionen BEAT-EFFEKTTYPEN Erzeugen VON BEAT-EFFEKTEN Effektfunktionen Erzeugen VON BEAT-EFFEKTENGebrauch der TAP-Taste für manuelle Eingabe des BPM-Wertes Wiedergabe eines aufgezeichneten Sample EINGANGSSCHLEIFEN-SAMPLERLöschen eines aufgezeichneten Sample Effektfunktionen EINGANGSSCHLEIFEN-SAMPLEREffektfunktionen Effektparameter EffektparameterBezeichnung Parameter 1 BEAT-Taste FunktionStörungsbeseitigung StörungsbeseitigungStörung Mögliche Ursache Abhilfemaßnahme Importante Avvertenze PER L’USOPosizionamento Pulizia dell’apparecchioPrima DELL’USO CaratteristicheOperazioni Altri DatiPannello DEL Collegamenti CollegamentiPannello posteriore Pannello anterioreCollegamenti DI Uscita Collegamento Degli IngressiCollegamento DEL Cavo DI Alimentazione ItalianoNome Delle Varie Parti E Loro Funzione Nome Delle Varie Parti E Loro FunzioneSelettore d’ingresso del canale Manopola di regolazione TrimPulsante/indicatore di effetto ON/OFF Indicatori del livello di uscita principalePulsante/indicatore della modalità di misurazione BPM Auto Selettore di effetti DELAY/ECHO/FILTEROperazioni DI Base Operazioni COL MixerInizio della riproduzione con la dissolvenza incrociata Inizio della riproduzione con la dissolvenza dei canaliOperazioni COL Mixer Funzione DI Inizio Della Dissolvenza Funzioni DI Effetto Tipi DI Effetti RitmiciFunzioni DI Effetto Tipi DI Effetti Ritmici Campionatore DI Cicli Produzione DI Effetti DI RitmoGirando la manopola LEVEL/DEPTH si regola il parametro Quantitativo dell’effetto sceltoCancellazione di un campione Parametri Degli EffettiRiproduzione di un campione registrato Diagnostica Funzioni DI Effetto Parametri Degli Effetti / DiagnosticaProblema Causa possibile Rimedio Waarschuwingen I.V.M. HET Gebruik InstallatieplekBelangrijk Het toestel schoonmakenKenmerken InhoudsopgaveVoor Gebruik BedieningAchterpaneel Voorpaneel OP DE Ingangen Aansluiten VAN ApparatuurAansluiten VAN Apparatuur OP DE Uitgangen Aansluiten VAN HET NetsnoerBenaming EN Functie VAN DE Bedieningsorganen BPM meetmethodetoets/indicator Auto Hoofdniveau-indicators Master LevelEffecttoets/indicator ON/OFF Hoofduitvoer-niveauregelaar Master LevelBasisbediening Bediening VAN HET MengpaneelKiezen van de kruisfadercurve FaderstartfunctieGebruik van de kruisfader om te starten met afspelen Gebruik van de kanaalfader om te starten met afspelenEffectfuncties Typen BEAT-EFFECTENEffectfuncties Typen BEAT-EFFECTEN Effectfuncties BEAT-EFFECTEN PRODUCEREN/IN-LOOP Sampler BEAT-EFFECTEN ProducerenZet de ON/OFF toets op on om het gekozen effect in te SchakelenWeergeven van een opgenomen sample EffectparametersWissen van een opgenomen sample Effectfuncties IN-LOOP SAMPLER/EFFECTPARAMETERSEffectfuncties Effectparameters / Verhelpen VAN Storingen Verhelpen VAN StoringenStoring Mogelijke oorzaak Maatregelen LevelSituación Precauciones Para LA ManipulaciónLimpieza de la unidad AdvertenciaEspecificaciones ÍndiceCaracterísticas ÑolPanel DE Conexiones ConexionesPanel posterior Panel frontalConexiones DE LAS Entradas Conexiones DE SalidaEspañol Nomenclatura Y Funciones DE LOS Controles Nomenclatura Y Funciones DE LOS ControlesSelector de entrada del canal Control de ajuste del nivel de entrada TrimIndicadores del nivel principal Master Level Control deslizante de fundido cruzadoControl del nivel de salida principal Master Level Sección de efectos de compás Visualizador del valor de BPMOperaciones Básicas Operaciones DE LA Consola DE MezclaFunción DE Inicio CON Fundido Empleo del fundido cruzado para iniciar la reproducciónEmpleo del fundido de canales para iniciar la reproducción Funciones DE LOS Efectos Tipos DE Efectos DE CompásFunciones DE LOS Efectos Tipos DE Efectos DE Compás Entrada manual de BPM empleando el botón TAP Producción DE Efectos DE CompásEntrada manual de BPM empleando los botones BEAT/PITCHPara reproducir una muestra grabada Parámetros DE LOS EfectosBorrado de una muestra grabada BEAT/BANKSíntoma Causa posible Solución Solución DE ProblemasDSP
Top Page Image Contents