Pioneer DJM-400 Parámetros DE LOS Efectos, Para reproducir una muestra grabada, Beat/Bank

Page 74

FUNCIONES DE LOS EFECTOS (MUESTREADOR DE BUCLES DE ENTRADA/PARÁMETROS DE LOS EFECTOS)

Esta función detecta el valor de BPM de la pista actual, y se graban fuentes de 4 tiempos hasta en cinco bancos de memoria, y se reproducen como bucles en sincronización con el valor BPM de la pista actual. También es posible efectuar la grabación sobrepuesta.

1.Ajuste el selector de efectos en [IN-LOOP SAMPLER].

2.Ajuste el selector del canal de efectos al canal que desee muestrear la grabación.

3.Mida el valor de BPM.

Efectúe el paso 1 de la sección “PRODUCCIÓN DE EFECTOS DE COMPÁS” (página 73).

4.Ajuste el botón ON/OFF en ON.

5.En el punto en el que desee muestrear la grabación, presione uno de los botones BEAT/BANK que no esté encendido.

Los botones BEAT/BANK encendidos ya han sido grabados, y no pueden volverse a utilizar a menos que se borre el contenido que tienen grabado.

La grabación se inicia automáticamente cuando se detecta la señal de sonido del reproductor de CD o de otro componente. Durante la grabación, el botón BEAT/BANK parpadeará con rapidez. Durante la espera de grabación, el botón parpadeará lentamente a intervalos.

Cuando se han grabado 4 tiempos de sonido al valor de BPM medido, el botón BEAT/BANK parpadeará lentamente y se efectuará la reproducción del bucle.

6.Si el tiempo pierde la sincronización, presione uno de los botones BEAT/PITCH (–, +) para volver a sincronizar la temporización de la muestra de reproducción con la pista que actualmente se está reproduciendo.

La velocidad de reproducción incrementa mientras se tiene presionado el botón [+] , y se reduce mientras se presiona el botón [].

7.Gire el control LEVEL/DEPTH para ajustar el balance del sonido entre la fuente y la muestra.

8.Para detener la reproducción de bucle, presione el botón BEAT/BANK correspondiente.

El indicador del botón BEAT/BANK cambiará de parpadeo lento a quedar encendido.

[Para reproducir una muestra grabada]

1Ajuste el selector de efectos en [IN-LOOP SAMPLER].

2Emplee el selector de canales de efectos para seleccionar

el canal para vuelta a bucle.

3Ajuste el botón ON/OFF en ON.

4Presione el botón BEAT/BANK que contenga la muestra que desea reproducir como un bucle.

Los botones BEAT/BANK con muestras grabadas se encenderán.

El botón seleccionado parpadeará lentamente y se iniciará la reproducción del bucle.

5Si el tiempo pierde la sincronización, presione uno de los botones BEAT/PITCH (–, +) para volver a sincronizar la temporización de la muestra de reproducción con la pista que actualmente se está reproduciendo.

La velocidad de reproducción incrementa mientras se tiene presionado el botón [+], y se reduce mientras se presiona el botón [].

6Gire el control LEVEL/DEPTH para ajustar el balance del

sonido entre la fuente y la muestra.

7Para detener la reproducción de bucle, presione el botón BEAT/BANK correspondiente.

El indicador del botón BEAT/BANK quedará encendido.

[Borrado de una muestra grabada]

1Ajuste el selector de efectos en [IN-LOOP SAMPLER].

2Mientras mantiene presionado el botón ERASE (BEAT/ PITCH –), presione el botón BEAT/BANK que contenga la muestra que desea borrar.

Los botones BEAT/BANK que contengan muestras grabadas se encenderán.

El indicador del botón BEAT/BANK seleccionado se apagará y se borrará la muestra.

8. IN-LOOP SAMPLER

Esta función le permitirá guardar sonidos de 4 tiempos hasta en 5 bancos, y luego emitirlos repetidamente.

Ejemplo

Banco 1

Pista actual

BPM=125

Repetición

Banco 1 activado

PARÁMETROS DE LOS EFECTOS

 

 

Parámetros de los botones

Parámetro 1 (botón BEAT)

Parámetro 2

 

Nombre

 

Margen de ajuste

 

BEAT/BANK

Contenido

(control LEVEL/DEPTH)

 

 

(unidad)

 

 

 

 

 

 

 

 

 

 

 

1

DELAY

Ajusta el tiempo de retardo de 1/2 a

Ajusta el tiempo

1 a 8 000 (ms)

Ajusta el balance entre el sonido

 

 

4/1 por 1 tiempo del tiempo de BPM.

de retardo.

 

original y el de retardo.

 

 

 

 

 

 

2

ECHO

Ajusta el tiempo de retardo de 1/2 a

Ajusta el tiempo

1 a 8 000 (ms)

Ajusta el balance entre el sonido

 

 

4/1 por 1 tiempo del tiempo de BPM.

de retardo.

 

original y el de eco.

 

 

 

 

 

 

3

FILTER

El ciclo de desplazamiento de la

Ajusta el ciclo

10 a 32 000 (ms)

La cantidad del efecto se incrementa

 

 

frecuencia de corte se ajusta en

para

 

cuando se gira el control hacia la

 

 

unidades de 1/1 a 16/1 con relación a

desplazamiento

 

derecha.

 

 

1 tiempo de BPM.

del tiempo de

 

 

 

 

 

corte.

 

 

 

 

 

 

 

 

4

FLANGER

El ciclo de desplazamiento de

Ajusta el ciclo

10 a 32 000 (ms)

La cantidad del efecto se incrementa

 

 

“flanger” se ajusta en unidades de

para

 

cuando se gira el control hacia la

 

 

1/1 a 16/1 con relación a 1 tiempo de

desplazamiento

 

derecha. Cuando se gira el control

 

 

BPM.

del efecto

 

hacia la izquierda, sólo se emite el

 

 

 

“flanger”.

 

sonido original.

 

 

 

 

 

 

74

<DRB1404> Sp

Image 74
Contents DJM-400 Location Cleaning the UnitPOWER-CORD Caution Important the Moulded PlugContents FeaturesRear panel ConnectionsConnection Panel Front panelConnecting the Power Cord Connecting InputsConnecting Outputs EnglishFader Start Names and Functions of PartsNames and Functions of Parts Bank CH. Select 1/2/MIC/MASTERMixer Operations Basic OperationsFader Start Function Using the Cross Fader to Start PlaybackUsing the Channel Fader to Start Playback Mixer Operations Fader Start FunctionEffect Functions Types of Beat EffectsProducing Beat Effects Using the TAP Button for Manual BPM InputUsing the BEAT/PITCH buttons for Manual BPM Input IN-LOOP SamplerErasing a Recorded Sample Effect ParametersTo Playback a Recorded Sample Effect Functions IN-LOOP SAMPLER/EFFECT ParametersSymptom Possible Cause Remedy TroubleshootingTroubleshooting ThruNettoyer l’appareil EmplacementAvertissements Concernant L’USAGE AvertissementAvant L’UTILISATION Table DES MatièresCaractéristiques UtilisationPanneau arrière BranchementsPanneau DE Connexion Panneau avantFrançais Branchement DES EntréesBranchements DE Sortie Noms ET Fonctions DES Organes Noms ET Fonctions DES OrganesDELAY/ECHO/FILTER/FLANGER/PHASER ROBOT/ROLL/IN-LOOP Sampler Master LevelUtilisation DU Mixeur Démarches DE BaseLancement de la lecture par fondu croisé Fonction DE Départ EN FonduSélection de la courbe de fondu croisé Lancement de la lecture par fondu de canalFonctions DES Effets Types D’EFFETS DE Battement Fonctions DES EffetsTypes D’EFFETS DE Battement Utilisation du bouton TAP pour une saisie BPM manuelle Production D’EFFETS DE BattementÉchantillonneur D’ENTRÉE DE Boucle Effacement d’un échantillon enregistré Paramètres DES EffetsLecture d’un échantillon enregistré Symptômes Causes possibles Corrections Master LevelAufstellung Vorsichtshinweise ZUR HandhabungWichtig Reinigen des GerätesMerkmale InhaltsverzeichnisTechnische Daten Anschlüsse AnschlüsseRückwand Frontplatte Anschlüsse AN DEN Eingangsbuchsen DeutschMaster-Ausgang Anschlüsse AN DEN AusgangsbuchsenAnschliessen DES Netzkabels KopfhörerBezeichnung UND Funktion DER Bedienelemente FLANGER/PHASER/ROBOT/ROLL/IN-LOOP Sampler Bedienung DES Mischpults Grundlegende BedienungsverfahrenBedienung DES Mischpults FADER-STARTFUNKTION FADER-STARTFUNKTIONStarten der Wiedergabe über Kanal-Faderhebel Wiedergabestart und Cue-Rücklauf über Kreuz-FaderhebelEffektfunktionen BEAT-EFFEKTTYPEN EffektfunktionenBEAT-EFFEKTTYPEN Gebrauch der TAP-Taste für manuelle Eingabe des BPM-Wertes Erzeugen VON BEAT-EFFEKTENEffektfunktionen Erzeugen VON BEAT-EFFEKTEN Löschen eines aufgezeichneten Sample EINGANGSSCHLEIFEN-SAMPLERWiedergabe eines aufgezeichneten Sample Effektfunktionen EINGANGSSCHLEIFEN-SAMPLERBezeichnung EffektparameterEffektfunktionen Effektparameter Parameter 1 BEAT-Taste FunktionStörung Mögliche Ursache Abhilfemaßnahme StörungsbeseitigungStörungsbeseitigung Posizionamento Avvertenze PER L’USOImportante Pulizia dell’apparecchioOperazioni CaratteristichePrima DELL’USO Altri DatiPannello posteriore CollegamentiPannello DEL Collegamenti Pannello anterioreCollegamento DEL Cavo DI Alimentazione Collegamento Degli IngressiCollegamenti DI Uscita ItalianoSelettore d’ingresso del canale Nome Delle Varie Parti E Loro FunzioneNome Delle Varie Parti E Loro Funzione Manopola di regolazione TrimPulsante/indicatore della modalità di misurazione BPM Auto Indicatori del livello di uscita principalePulsante/indicatore di effetto ON/OFF Selettore di effetti DELAY/ECHO/FILTEROperazioni COL Mixer Operazioni DI BaseOperazioni COL Mixer Funzione DI Inizio Della Dissolvenza Inizio della riproduzione con la dissolvenza incrociataInizio della riproduzione con la dissolvenza dei canali Funzioni DI Effetto Tipi DI Effetti Ritmici Funzioni DI EffettoTipi DI Effetti Ritmici Girando la manopola LEVEL/DEPTH si regola il parametro Produzione DI Effetti DI RitmoCampionatore DI Cicli Quantitativo dell’effetto sceltoRiproduzione di un campione registrato Cancellazione di un campioneParametri Degli Effetti Problema Causa possibile Rimedio DiagnosticaFunzioni DI Effetto Parametri Degli Effetti / Diagnostica Belangrijk InstallatieplekWaarschuwingen I.V.M. HET Gebruik Het toestel schoonmakenVoor Gebruik InhoudsopgaveKenmerken BedieningAchterpaneel Voorpaneel Aansluiten VAN Apparatuur OP DE Uitgangen Aansluiten VAN ApparatuurOP DE Ingangen Aansluiten VAN HET NetsnoerBenaming EN Functie VAN DE Bedieningsorganen Effecttoets/indicator ON/OFF Hoofdniveau-indicators Master LevelBPM meetmethodetoets/indicator Auto Hoofduitvoer-niveauregelaar Master LevelBediening VAN HET Mengpaneel BasisbedieningGebruik van de kruisfader om te starten met afspelen FaderstartfunctieKiezen van de kruisfadercurve Gebruik van de kanaalfader om te starten met afspelenEffectfuncties Typen BEAT-EFFECTEN EffectfunctiesTypen BEAT-EFFECTEN Zet de ON/OFF toets op on om het gekozen effect in te BEAT-EFFECTEN ProducerenEffectfuncties BEAT-EFFECTEN PRODUCEREN/IN-LOOP Sampler SchakelenWissen van een opgenomen sample EffectparametersWeergeven van een opgenomen sample Effectfuncties IN-LOOP SAMPLER/EFFECTPARAMETERSStoring Mogelijke oorzaak Maatregelen Verhelpen VAN StoringenEffectfuncties Effectparameters / Verhelpen VAN Storingen LevelLimpieza de la unidad Precauciones Para LA ManipulaciónSituación AdvertenciaCaracterísticas ÍndiceEspecificaciones ÑolPanel posterior ConexionesPanel DE Conexiones Panel frontalEspañol Conexiones DE LAS EntradasConexiones DE Salida Selector de entrada del canal Nomenclatura Y Funciones DE LOS ControlesNomenclatura Y Funciones DE LOS Controles Control de ajuste del nivel de entrada TrimControl del nivel de salida principal Master Level Control deslizante de fundido cruzadoIndicadores del nivel principal Master Level Sección de efectos de compás Visualizador del valor de BPMOperaciones DE LA Consola DE Mezcla Operaciones BásicasEmpleo del fundido de canales para iniciar la reproducción Función DE Inicio CON FundidoEmpleo del fundido cruzado para iniciar la reproducción Funciones DE LOS Efectos Tipos DE Efectos DE Compás Funciones DE LOS EfectosTipos DE Efectos DE Compás Entrada manual de BPM empleando los botones Producción DE Efectos DE CompásEntrada manual de BPM empleando el botón TAP BEAT/PITCHBorrado de una muestra grabada Parámetros DE LOS EfectosPara reproducir una muestra grabada BEAT/BANKSolución DE Problemas Síntoma Causa posible SoluciónDSP

DJM-400 specifications

The Pioneer DJM-400 mixer is a compact yet powerful addition to any DJ's setup, designed to blend professional capabilities with ease of use. As a two-channel mixer, it provides a perfect balance between features and simplicity, making it ideal for both beginner and experienced DJs.

One of the standout features of the DJM-400 is its high-quality sound output. The mixer is equipped with 48 kHz/24-bit digital signal processing, ensuring crystal-clear audio quality. This level of fidelity is crucial for DJs who want to deliver a party experience that is both immersive and engaging.

The DJM-400 includes a built-in sound card for seamless digital connectivity. This allows DJs to connect to a computer or laptop easily, enabling them to use software like Serato or Traktor. The mixer supports multiple formats and offers USB connectivity, which means it can also be used with a wide variety of devices. Its plug-and-play design minimizes setup time, letting DJs focus on their performance rather than technical issues.

Another noteworthy characteristic is the integrated digital effects processor. The DJM-400 features a range of built-in effects, including delay, echo, and flanger, which can be applied to individual channels, allowing DJs to add depth and dimension to their mixes. The effects can be manipulated using intuitive controls, making it easy to create unique sounds on the fly.

The layout of the DJM-400 has been thoughtfully designed to facilitate quick and easy adjustments. The EQ section features three-band equalizers for each channel, allowing precise control over bass, midrange, and treble frequencies. This empowers DJs to tailor their sound according to the venue and crowd.

Moreover, the DJM-400 comes with a crossfader that is exceptionally smooth, enabling seamless transitions between tracks. The fader is also replaceable, ensuring longevity and catering to individual preferences in performance style.

In summary, the Pioneer DJM-400 is a highly capable mixer that combines excellent sound quality, advanced technology, and user-friendly design. The inclusion of a built-in sound card, a suite of digital effects, and an intuitive layout makes it a versatile choice for DJs of all skill levels. Whether you're just starting your DJ journey or you're a seasoned professional, the DJM-400 delivers the features needed to elevate your performances and connect with your audience.