Pioneer DJM-1000 operating instructions Headphones Mono SPLIT/STEREO, Headphones Level

BEFORE USING (PART NAMES AND FUNCTIONS)

24.Cross fader assign B indicator (B)

Lights green when power is ON.

25.Channel fader slider

Adjusts volume of each channel. (Adjustable range: –∞to 0 dB)

Outputs according to the channel fader curve set by the CURVE ADJUST dial (CH FADER).

Master output control section 26. MASTER fader slider

Adjusts the volume of the master output. (Adjustable range: –∞to 0 dB)

The master output is the combination of the channel whose audio has been set to [THRU] by the CROSS FADER ASSIGN switch, together with the audio passed through the cross fader and the audio from the main microphone (depending on the mode, RETURN input will also be added).

Headphone output section

36. Headphone output selector switch

(HEADPHONES — MONO SPLIT/STEREO)

MONO SPLIT:

The audio source selected by the headphone CUE button is output from the left channel, and the master audio is output from the right channel (Only when MASTER is selected with the headphone CUE button).

STEREO:

The selected audio is output in stereo.

37.Headphone MIXING dial (HEADPHONES MIXING)

When turned clockwise (MASTER direction) the master output audio is output (only when MASTER is selected with the headphone CUE button); when turned counterclockwise (CUE direction), the audio output will be a mixture of the sound from the channel selected with the headphone CUE button, and the sound coming from the external effector (RETURN).

English

27. MASTER BALANCE dial	38.	Headphone LEVEL adjust dial
Adjusts the L/R channel balance of the master output,		(HEADPHONES LEVEL)
booth monitor output, recording output, and digital output.	Adjusts the output volume of the headphone connector.
	(Adjustable range: –∞to 0 dB)
28. MASTER LEVEL indicators (L, R)
	39.	Headphone jack (PHONES)
Displays output levels of the L channel and the R channel.

Each segment provides 2 seconds of peak hold.

29.MASTER ISOLATOR button/indicator (ON)

Turns master isolator function ON/OFF.

The isolator function operates with respect to master output 1, master output 2, booth monitor output, recording output and digital output.

Turns off when OFF, and lights when ON.

30.MASTER ISOLATOR high-range sound adjust

dial (HI)

Use to adjust the high-range sound of the master output signal.

(Adjustable range: –∞to +6 dB)

31. MASTER ISOLATOR mid-range sound adjust dial (MID)

Used to adjust the mid-range sound of the master output signal.

(Adjustable range: –∞to +6 dB)

32.MASTER ISOLATOR low-range sound adjust dial (LOW)

Used to adjust the low-range sound of the master output signal.

(Adjustable range: –∞to +6 dB)

Booth monitor control section

33. BOOTH MONITOR equalizer high-range sound adjust dial (HI)

Used to adjust the high-range sound of the booth monitor output signal.

(Adjustable range: –6 dB to +6 dB)

34. BOOTH MONITOR equalizer low-range sound adjust dial (LOW)

Used to adjust the low-range sound of the booth monitor output signal.

(Adjustable range: –6dB to +6 dB)

35.BOOTH MONITOR LEVEL adjust dial

Adjusts the volume of the booth monitor output.

Adjustable regardless of setting of master fader. (Adjustable range: –∞to 0 dB)

SEND/RETURN section

40. SEND/RETURN type selector switches

Use to switch between the sending stage (SEND) and input stage (RETURN) for signals when connected to an external effector (P.14).

[Pre-Insert type]

Input
EQ
	SEND
	RETURN
S/R ON	S/R LEVEL
CH
FADER
CROSS	MASTER	Output
FADER	FADER

[Post-Insert type]

Input

EQ

CH

FADER

	SEND
	RETURN
S/R ON	S/R LEVEL
CROSS	MASTER	Output
FADER	FADER

11

<DRB1372> En