OPERATIONS
FADER START FUNCTION
By using a control cable to connect the unit to an optional PIONEER CD player, playback on the CD player can be started using the channel fader or cross fader functions (if a digital link connection is made, use of the control cable is unnecessary).
The CD player’s pause function is canceled when the mixer’s channel fader slider or cross fader slider is moved, and the playback of the track starts automatically and instantly. In addition, by returning the fader to it’s former position, the CD player’s playback can be returned back to the cue point (back cue), so that
[Cross fader start play & back cue play]
During cue point standby on the CD player assigned to channel A of the cross fader, moving the cross fader slider from the right side (B side) to the left side (A side) causes the CD player connected to channel A to start playback.
When the cross fader slider reaches the left side (A side), the CD player assigned to channel B will back cue (return to cue point). When the CD player assigned to channel B is in cue point standby mode, moving the cross fader slider from the left side (A side) to the right side (B side), causes playback on the CD player assigned to channel B to begin. When the cross fader slider reaches the right side (B side), the CD player assigned to channel A will back cue.
*Back cue will occur even if the input selector switch is not set to [CD/LINE].
External effector
[Starting playback with channel fader]
1Press the FADER START button for the channel
÷ The button of the selected channel will light.
2Move the channel fader slider to the [0] position.
3Set a cue point in the CD player, and set to standby at cue point.
÷If a cue point has already been set, the CD player does not have to be set to standby at the cue point.
4Move channel fader slider at the desired timing to start playback.
÷CD player will start playback.
÷After playback has started, moving the channel fader
slider back to [0] causes the CD player to return to cue point and enter standby mode (back cue).
*Channel fader is enabled for control only when CROSS FADER ASSIGN switch is set to [THRU].
14
[Starting playback with cross fader]
1Press the FADER START button for the channel
÷The button of the selected channel will light.
2Set the CROSS FADER ASSIGN switch of the selected channel to either [A] or [B].
÷When assigning to channel A (left side) of the cross fader, set to [A].
÷When assigning to channel B (right side) of the cross fader, set to [B].
3Move the cross fader slider as far as it will go to the opposite side of the channel you wish to start.
4Set a cue point on the CD player, and set to standby at the cue point.
÷If a cue point has already been set, the CD player does not have to be set to standby at the cue point.
5Move the cross fader slider at the desired timing to start playback.
÷CD player will start playback.
÷After playback has started, by moving the cross fader slider all the way, the CD player assigned at the opposite side will return to cue point and enter standby mode (back cue).
*The fader start function may not operate properly when digital connections are made alone. In this event, connect the CD player's analog connectors as well.
USING EXTERNAL EFFECTORS
Two effectors can be connected if desired.
1.Use the SEND channel selector switch to choose the source to be sent to the effector.
÷Select from either [MIC], channel
2.Use the SEND/RETURN selector switch to choose the stage to which the effector is connected.
÷When the send channel is set to [MIC], [INSERT] and [AUX] switching only are enabled from the same point for both [PRE] and [POST]. When send channel is set to [MASTER], only [INSERT] is enabled.
PRE INSERT:
Equalizer output, sent from before the channel fader and returned to same point.
POST INSERT:
Channel fader output, sent from before the cross fader assign, and returned to the same point.
AUX:
Channel fader output, sent from before the cross fader assign and returned to the point before the master fader, and then added to any other output. The original sound which has been sent will also be passed through the cross fader assign and added.
3.Set the SEND/RETURN button to ON.
÷The SEND/RETURN button flashes.
4.Adjust the RETURN volume with the RETURN dial (LEVEL).
Position |
|
|
|
|
|
| |
Source | PRE | POST AUX | PRE POST AUX | PRE | POST AUX | ||
INSERT |
| INSERT |
| INSERT | |||
MIC |
|
| INSERT |
|
| AUX | |
PRE |
| POST |
| AUX | |||
MASTER |
|
|
| INSERT |
|
| |
EQUALIZER | CH. FADER | C. F. ASSIGN | CROSS FADER | MASTER FADER | |||
SEND/RETURN | SEND/RETURN |
|
|
| |||
| ON |
| ON |
|
|
| ON |
| LEVEL |
|
| LEVEL |
|
| |
|
|
| SEND/RETURN |
| |||
|
|
|
|
|
| ||
| POST INSERT |
|
| POST |
| LEVEL | |
|
| PRE | INSERT |
|
| ||
|
|
|
|
|
|
| |
| PRE INSERT | AUX | INSERT | AUX |
|
| |
|
| SEND |
| RETURN |
|
|
<DRB1372> En