Cleaning the Shuttle Race and Feed Dogs
1Unplug the machine and remove the presser foot and needle. Open the face cover to allow room to remove the needle plate screw with a screwdriver. Remove the needle plate 1 and take out the bobbin.
1 Needle plate
2Lift up the bobbin holder 2 and remove it. 2 Bobbin holder
1
1
2
2
3
4
Brush out dust and lint inside the bobbin holder. Clean the feed dogs 3 and hook race 4 with a lint brush. Wipe out gently with a soft, dry cloth.
3Feed dogs
4 Hook race
Line up the triangle marks 5 and position the bobbin holder, so that the notch fits next to the stopper 6 in the hook race.
5Line up the triangle marks.
6The notch fits next to the stopper.
3
3 | 4 |
4
6
5
Oiling the Machine
Unplug the machine. Open the face cover and oil the two points, as shown, at least once a year. One or two drops of oil is sufficient. Remove excess oil, otherwise it may stain the fabric. In case the machine has not been used for a long period, oil it before sewing. Use quality sewing machine oil.
100