Pressure Adjusting Lever
q Pressure adjusting lever
The pressure adjusting lever should be set at “3” for regular sewing.
Reduce the pressure to “2” for applique, cut work, draw work and basting.
Set the pressure at “1” when sewing chiffon, lace, organdy and other fine fabrics. Velour and knits with a lot of stretch may also require the pressure at “1”.
q
Presser Foot Lifter
q Presser foot lifter w Normal up position e Highest position
The presser foot lifter raises and lowers the presser foot. You can raise it about 1/4" (0.6 cm) higher than the normal up position for easy removal of the presser foot, or to help you place heavy fabric under the foot.
Thread Cutter
q Thread cutter
You do not need a pair of scissors to cut the thread after sewing. Simply use the
Extension Table
•Detaching the table
Pull the table away from the machine, as illustrated, for
•Attaching the table
Push the extension table until it snaps into the machine. q Extension table
w Pin e Holes r Tab
t
•Accessory box
Open the cover of the accessory box toward you. The sewing accessories are conveniently located in the box.
w | e |
| |
e | w |
| |
| q |
q
t
w
e r
q
10