Janome MS-5027 instruction manual Twin Needle Stitches Option

Twin Needle Stitches (Option)

1	Stitch selector:	13 to 18
2	Stitch width:	1 to 2.5
3	Stitch length:	Gold stretch stitch position
		or green zone
4	Needle thread tension:	3 to 7
5	Presser foot A:	Zigzag foot
6	Presser foot F:	Satin stitch foot
7	Needle:	Twin needle (optional item)

Select stitch width within the indicated twin needle sewing zone ( ).

1Upper thread guide

2 Check spring holder

3 Thread take-up lever

4 Needle bar thread guide

5 Twin needle (optional item)

Turn off the power switch. Insert the additional spool pin into its hole. Place a piece of felt and a spool on the additional spool pin. Make sure you separate the two threads by placing one thread in each needle bar thread guide 4 .

Change the needle to a twin needle 5 . Thread each needle from front to back.

When you want to shift the fabric to change the sewing direction, you must first raise the needle out of the fabric.

1

			2
			3
4	5	6	7
5		or
4
		o
3		ou

3 1

4

5

2

4

5

70