Monitoring with an ASCII Terminal
2Type 1 then press ENTER . The Current System Status menu displays.
May 3, 1999 | ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx | 13:14:35 | |||
Local Unit ID: |
| Local I/F: | REX | ||
Remote Unit ID: |
| Remote I/F: REX | |||
Circuit ID: | Network | Extension Circuit 5001 |
|
| |
|
| CURRENT | SYSTEM STATUS |
|
|
Local Alarms: |
|
|
|
| |
Remote Alarms: |
|
|
|
| |
Loopback: None |
|
|
|
| |
|
|
| |||
|
| LOCAL | REMOTE | LOCAL | REMOTE |
|
| ||||
|
| mn/cr/mx | mn/cr/mx | mn/cr/mx | mn/cr/mx |
Margin (dB): | na/na/na | na/na/na | na/na/na | na/na/na | |
Pulse Attn (dB): | 00 | 00 | 00 | 00 | |
24 Hour ES: | 00000 | 00000 | 00000 | 00000 | |
24 Hour UAS: | 05671 | 00000 | 05671 | 00000 | |
Last Cleared: | None |
|
|
| |
|
| (U)pdate (C)lear |
|
| |
|
| (R)eturn | (M)ain Menu |
|
|
ENTER CHOICE> |
|
|
|
|
|
The Current System Status menu provides the following information:
•Local Alarms indicates the current local alarm status
•Remote Alarms indicates the current remote alarm status
•Loopback indicates the current loopback status
•Margin indicates the minimum (mn), current (cr), and maximum (mx) HDSL margin value, measured in dB, relative to the
•Pulse Attn indicates the decrease in amplitude of the transmitted signal as measured at the HDSL receiver
•24 Hour ES indicates the number of errored seconds over the last 24 hours
•24 Hour UAS indicates the number of unavailable seconds over the last 24 hours
•Last Cleared indicates the date and time when the error counter was last cleared