CONFIGURING

AND MONITORING 4

THROUGH THE LCD

You can configure the Campus-REX RS Interface Card and view system information using the LCD and menu buttons located on the front of the Campus-RS Desktop Unit or a CMU installed in the Campus-Star chassis.

This chapter describes how to use the LCD to set the individual configuration options.

For Information About:

See Page:

 

 

Navigating the LCD Menus

4-2

Restoring the System to Default Values

4-3

Configuring the Campus-REX as a Master or Slave Unit

4-4

Viewing and Configuring Alarms

4-5

Configuring Loopbacks

4-10

Viewing System Information

4-12

Viewing Status Information

4-13

 

 

You can also perform these functions through an ASCII terminal connected to the Desktop Unit or a Campus-RS Line Unit installed in the Campus-Star. To use an ASCII terminal to configure the system, see “Configuring with an ASCII Terminal” on page 5-1. To view system and status information, see “Monitoring with an ASCII Terminal” on page 6-1.

Campus-REX RS Interface Card User Manual

4-1