Set Up the Campus-REX System

From an ASCII Terminal

1If you have not already done so, follow the steps in “Set Up an ASCII Terminal” on page 3-2to connect the ASCII terminal and log on to the Main Menu.

2From the Main Menu, type 2 then press ENTER . The Data Port Settings menu displays.

On the Data Port Settings menu, option 4 to Reset the Interface Card displays only when you have changed configuration that requires you to save to NVRAM and then reset the modem to effect the change.

Dec 9, 1999

ADC DSL SYSTEMS INC.,

CAMPUS RS, Version x.xx

13:16:44

Local Unit ID:

 

Campus-REX Unit #34

Local I/F:

REX

Remote Unit ID:

Campus-REX Unit #12

Remote I/F: REX

Circuit ID:

 

Network Extension Circuit 5001

 

 

 

 

DATA PORT SETTINGS

 

MAC ADDRESS:

00:20:A7:21:2F:6B

 

10BASE-T STATUS: Up

1)BRIDGE/ROUTER CONFIGURATION

2)SNMP CONFIGURATION

3)WRITE NVRAM

4)RESET INTERFACE CARD

WARNING: NVRAM must be written and interface card reset for any configuration changes to take effect.

(R)eturn

ENTER CHOICE>

3Type 1 then press ENTER . The Bridge/Router Configuration menu displays.

Campus-REX RS Interface Card User Manual

3-21