Installing the Campus-REX RS Interface Card

Installing into a Campus-Star Chassis

This section describes how to install the Campus-REX in a Campus-Star chassis.

Before installing the Campus-REX, make sure there is not a Line Unit installed in the corresponding slot on the front of the Campus-Star chassis. The Campus-REX is not hot-swappable. Installing the Campus-REX with a corresponding Line Unit installed may cause damage to the Campus-REX, the Line Unit, or both.

1Slide the card into the guide rails in the desired slot on the rear of the Campus-Star chassis.

DSX-1

DSX-1

620 DSX-1/T CFG 620 DSX-1/T CFG

Campus-Star chassis

CFG

Campus-REX RS Interface card

Campus-REX RS Interface Card User Manual

2-3