ADC Campus-REX RS Interface Card LOGGING OFF OF A CAMPUS UNIT, LOGGING ONTO A REMOTE CAMPUS UNIT

Configuring with an ASCII Terminal

LOGGING ONTO A REMOTE CAMPUS UNIT

This section describes how to log on to a remote Campus unit.

1Press the spacebar on the ASCII terminal keyboard several times until the baud rate is established and the Login Password screen displays on the terminal monitor.

2Press ENTER to log on. If you have changed the password, type your password then press ENTER . The Main Menu displays.

3Press 5 then press ENTER .

The menu header changes to indicate the remote unit ID as the local unit, and local unit ID as the remote. This shows that the terminal program is physically connected to the local unit, but is configuring as if it were connected to the remote unit. The prompt changes to REMOTE LOGON PASSWORD.

If the remote unit is a Campus-REX, the screens and procedures on the Remote Main Menu are identical to those on the Local Main Menu, except the REMOTE LOGON option is unavailable. If the remote unit is not a Campus-REX, the screens will be those for the remote interface card. See the User Manual for the interface card for a description of the screens and configuration options.

LOGGING OFF OF A CAMPUS UNIT

From the Main Menu, type Q then press ENTER to log off of the unit menus. If the Main Menu is not the current menu, type R then press ENTER until the Main Menu displays.

Campus-REX RS Interface Card User Manual 5-3