ADC Campus-REX RS Interface Card Using the LCD, Standard HDSL Mode

Set Up the Campus-REX System

Using the LCD

The steps in this section use the menu buttons and LCD on the front of the Desktop Unit or the Campus-Star Campus Management Unit (CMU). The figure below shows the LCD and menu buttons on the Campus-RS Desktop Unit. See the Campus-Star User Manual for the location of the LCD and menu buttons on the CMU. For a complete description of how to use the menu buttons and LCD, see “Navigating the LCD Menus” on page 4-2.

LCD	Menu buttons
	C A M PU S R S
HDSL	Next
Test	Escape
Port	Enter

To set the HDSL Transmission Rate:

1Press Escape until Campus RS I/F: REX displays.

2 Press Next. HDSL LINK CONFIG & STATUS displays.

3Press Enter. OPERATING MODE displays.

4Continue with one of the following sections, depending on whether you are using Standard Mode (page 3-8), Extended Mode (page 3-9), or AutoSync Mode (page 3-10).

Standard HDSL Mode

This section continues from Step 4 in the previous section to set a Standard Mode HDSL Rate.

Choose from the following settings:

•T1

•E1

•768

3-8 Campus-REX RS Interface Card User Manual