Configuring with an ASCII Terminal

Setting the Loopback Timeout

The loopback timeout determines the amount of time before a loopback clears automatically. Choose one of the following:

20 minutes

60 minutes

120 minutes

None (disables the loopback timeout)

If you set the loopback timeout to NONE, a loopback runs until you clear it manually or turn the unit off.

1Open the Loopback Settings menu.

2Type 7 then press ENTER . The Loopback Settings menu shows the new Loopback Timeout setting. Repeat this step until the desired setting displays.

Campus-REX RS Interface Card User Manual

5-23