Installing the Campus-REX RS Interface Card

Connecting the Cable

To connect the 10BASE-T cable to the Campus-REX RS Interface Card:

1Plug one end of the Category 3 cable into the 10BASE-T MDI connector on the rear of the Campus-REX.

Campus-RS Desktop Unit chassis

Local equipment (Ethernet)

10BASE-T port

6

 

31

ETHERNETF

C

G

BRIDGE

10BASE-T MDI port

LINK

or120

VAC@60Hz2A

 

220

VAC@50HzMax

.

Category 3 cable

2Connect the other end of the cable to your local equipment (repeater, PC, or other 802.3 device).

2-6

Campus-REX RS Interface Card User Manual