Configuring with an ASCII Terminal

The following SNMP parameters must be set to manage the Campus-REX over an SNMP network:

•SNMP Read Only Comm String provides the authentication string used for SNMP read-only operations

•SNMP Read Write Comm String provides the authentication string used for SNMP read-write operations

You can also set the Campus-REX to perform authentication error trap generation. To enable this feature, do the following:

•Set the Authentication Trap Status to Enabled or Disabled.

•Enter the IP Address for the first Trap Receiver.

•Enter a comm string for the first Trap Receiver.

•Enter the IP Address for the second Trap Receiver.

•Enter a comm string for the second Trap Receiver.

To configure the SNMP parameters:

1From the Main Menu, type 2 then press ENTER . The Data Port Settings menu displays.

Dec 9, 1999

ADC DSL SYSTEMS INC.,

CAMPUS RS, Version x.xx

13:16:44

Local Unit ID:

 

Campus-REX Unit #34

Local I/F:

REX

Remote Unit ID:

Campus-REX Unit #12

Remote I/F: REX

Circuit ID:

 

Network Extension Circuit 5001

 

 

 

 

DATA PORT SETTINGS

 

MAC ADDRESS:

00:20:A7:21:2F:6B

 

10BASE-T STATUS: Up

1)BRIDGE/ROUTER CONFIGURATION

2)SNMP CONFIGURATION

3)WRITE NVRAM

4)RESET INTERFACE CARD

WARNING: NVRAM must be written and interface card reset for any configuration changes to take effect.

(R)eturn

ENTER CHOICE>

Campus-REX RS Interface Card User Manual

5-7