Configuring with an ASCII Terminal

CONFIGURING STARTUP PARAMETERS

The Campus-REX can take its startup information from its internal NVRAM or from a network server. For more information about downloading startup information from a network, see “Management Protocols” on page 7-11.

Set the Boot Mode option to one of the following:

•Local sets the Campus-REX to receive its protocol and network configuration from internal memory.

•Network sets the Campus-REX to receive its startup data from a network server.

Set the Boot Mode only when the Campus-REX is set as a bridge. The Boot Mode setting has no effect when the Campus-REX is in router mode.

1From the Main Menu, type 2 then press ENTER . The Data Port Settings menu displays.

Dec 9, 1999

ADC DSL SYSTEMS INC.,

CAMPUS RS, Version x.xx

13:16:44

Local Unit ID:

 

Campus-REX Unit #34

Local I/F:

REX

Remote Unit ID:

Campus-REX Unit #12

Remote I/F: REX

Circuit ID:

 

Network Extension Circuit 5001

 

 

 

 

DATA PORT SETTINGS

 

MAC ADDRESS:

00:20:A7:21:2F:6B

 

10BASE-T STATUS: Up

1)BRIDGE/ROUTER CONFIGURATION

2)SNMP CONFIGURATION

3)WRITE NVRAM

4)RESET INTERFACE CARD

WARNING: NVRAM must be written and interface card reset for any configuration changes to take effect.

(R)eturn

ENTER CHOICE>

5-10

Campus-REX RS Interface Card User Manual