Set Up the Campus-REX System

Connecting the ASCII Terminal to the Campus Unit

To connect the Campus-REX RS Interface Card to an ASCII terminal:

1Plug the console adapter into the standard 9-pin COM port on the ASCII terminal and tighten the attached screws until they are snug. Skip this step if the ASCII terminal provides an RJ-48 jack.

2Plug one end of the console cable into the console adapter, then do one of the following:

Plug the other end of the console cable into the console port on the Desktop Unit.

Campus desktop chassis

ASCII terminal

9-pin COM port

Console port

E

 

TH

 

ER

 

NE

 

10BaseT

 

RID

 

GE

LINK

Cable

or120

VAC@60Hz2A

220

VAC@50HzMax

.

Campus-REX RS Interface Card User Manual

3-3