Installing the Campus-REX RS Interface Card
POWER UP AND CHECK THE ETHERNET LINE1Verify that the power cord is connected to the Desktop Unit or to the Campus-Star chassis (if you have an AC power supply) and to an external power source.
2Do one of the following:
•If the Campus-REX is installed in a Desktop Unit, press the power button on the back of the Desktop Unit.
•If the Campus-REX is installed in a Campus-Star, continue with Step 3.
3Verify that the Link LED on the Campus-REX card is green. This indicates that the 10BASE-T connection is operating correctly. If the Link LED does not light green, check the 10BASE-T cabling configuration.
Campus-REX RS Interface Card User Manual | 2-7 |
