INSTALLING

THE CAMPUS-REX RS 2

INTERFACE CARD

You can mate the Campus-REX with either a Campus-RS Desktop Unit or a Campus-RS Line Unit.

To Learn How to:

See Page:

 

 

Install the Card

2-1

Connect the Ethernet Line

2-4

Power Up and Check the Ethernet Line

2-7

 

 

INSTALL THE CARD

The following sections describe how to install the Campus-REX RS Interface Card.

Make sure you install the Campus-REX into a Campus-RS Desktop Unit or into a Campus-Star chassis with a Campus-RS Line Unit. The Campus-REX will not operate if it is installed in an earlier version of these Campus products.

Ensure you read important information on surge protection for HDSL line installation in the line unit or desktop unit manual before installing the interface card.

Campus-REX RS Interface Card User Manual

2-1