Set Up the
1From the HDSL Parameters menu, type 1 then press ENTER . The HDSL Operating Mode options changes from Standard Mode to Extended Mode.
Dec 9, 1999 | ADC DSL SYSTEMS | INC., CAMPUS RS, Version x.xx | 13:19:32 | ||
Local Unit ID: | Local I/F: | REX | |||
Remote Unit ID: | Remote I/F: REX | ||||
Circuit | ID: | Network Extension Circuit 5001 |
| ||
|
| EXTENDED MODE HDSL PARAMETERS |
| ||
1) | HDSL OPERATING MODE: | Extended | (Standard, Extended) | ||
2) | TRANSCEIVER MODE: | Auto | (Master, Slave, Auto) | ||
3) | HDSL LOOP MODE: | 2 Loops | (1 Loop, 2 Loops) |
| |
4) | HDSL RATE: | 256 |
|
| |
| *Note: |
|
|
| |
| 1 | Loop = single | loop, full duplex |
| |
| 2 | Loops = two loops, full duplex |
|
|
Changes will not be effective until this menu is exited!
(R)eturn (M)ain Menu
ENTER CHOICE>
2To change the HDSL Loop Mode, type 3 then press ENTER . Repeat this step until the desired HDSL Loop Mode setting displays.
3Type 4 then press ENTER . The Select HDSL Rate menu displays.