Configuring and Monitoring through the LCD

7Press Enter to select and save the desired option.

8If desired, press Escape several times to return to the top of the menu structure (CAMPUS RS I/F: REX).

See “LCD Menu Reference” on page A-3for an illustration of the hierarchical structure of the LCD menus.

RESTORING THE SYSTEM TO DEFAULT VALUES

You can restore all of the configuration options to their factory default values. This is an easy way to remove undesired configurations you may have set and want to return to their former settings.

To return the system configuration options to their default values:

1Press Escape until CAMPUS RS I/F: REX displays.

2Press Enter. S/W REV displays.

3Press Next six times. Press ENTER to factory reset displays.

4Press Enter. The system configuration options return to the default values.

Some options, such as the HDSL Rate must be the same for both the local and remote unit. Resetting the Campus unit configuration values on one unit only may cause the HDSL link to go down.

Campus-REX RS Interface Card User Manual

4-3