Set Up the
3Configure the ASCII terminal to the following communications settings:
•9600 baud
•no parity
•8 data bits
•1 stop bit
•no hardware flow control
Logging Onto the Terminal1Press the SPACEBAR on the ASCII terminal keyboard several times until the baud rate is established and the Login Password screen displays on the terminal monitor.
May 3,1999 | ADC DSL SYSTEMS INC., CAMPUS | RS, Version x.xx | 13:12:59 | |||
Local Unit | ID: | Unit | #34 | Local I/F: | REX | |
Remote Unit ID: | Unit | #12 | Remote I/F: REX | |||
Circuit ID: | Network Extension Circuit | 5001 |
|
LOGIN PASSWORD >