54.Error Code Programming Parameter “+054”

This option allows the owner to turn on or turn off certain errors in the control.

How to Program Error Code Programming Parameter

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 196

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+054” appears in the VFD. Refer to Figure 197.

C815I

Figure 197

4.When “+054” appears in the VFD, press the START (enter) keypad. A number will appear in the VFD. This number corresponds to the current Error Code Programming Parameter Value.

5.Locate the desired number in the first column of Table 9 on the following page.

Programming NetMaster

6.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number until correct. Refer to Figure 198.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 198

7.Press the START (enter) keypad when the correct number appears in the VFD. The next option, “+055”, will appear in the VFD.

NOTE: To program “+055” (Start Pulse Mode), refer to option 55. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

105