Opening the Service Door

(Coin Models Only)

Manually programming NetMaster requires the user to open and close the service door. Opening and closing the service door trips a switch allowing access to various programming options, diagnostics and audit capabilities.

The service door is located on the top of the meter case. Refer to Figure 3.

NOTE: For card models, the manual programming option is accessed by disconnecting and reconnecting a plug behind the control panel, or by inserting the appropriate card into the card reader.

WARNING

Any disassembly requiring the use of tools must be performed by a suitably qualified service person.

W299

SERVICE DOOR

W521IE1A

Figure 3

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

19