Programming NetMaster

32.Set Real-Time Clock Century “+032”

This option allows the owner to set NetMaster’s internal clock to the correct century.

How to Program the Clock Century

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 126

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+032” appears in the VFD. Refer to Figure 127.

C780I

Figure 127

4.When “+032” appears in the VFD, press the START (enter) keypad. The current century will appear in the VFD.

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the century until correct. Refer to Figure 128.

NOTE: The digits “20” are used for century.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 128

6.Press the START (enter) keypad when the correct century appears in the VFD. The next option, “+033, will appear in the VFD.

NOTE: To program “+033” (Normal Wash Agitate Time), refer to option 33. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

76

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140