Programming NetMaster

13.Special Vend A Start Date “+013”

This option allows the owner to set the date that Special Vend A will begin.

How to Program Special Vend A Start Date

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 55

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+013” appears in the VFD. Refer to Figure 56.

C775I

Figure 56

4.When “+013” appears in the VFD, press the START (enter) keypad. The current start date will appear in the VFD.

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the start date to the desired date. Refer to Figure 57.

If “0” is selected and Special Vend A is on, Special Vend A will occur at the time or days of week selected, regardless of the date.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 57

6.Press the START (enter) keypad when the correct date appears in the VFD. The next option, “+014”, will appear in the VFD.

NOTE: To program “+014” (Special Vend A End Month), refer to option 14. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

48

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140