
Programming NetMaster
34.Normal Extra Rinse Agitate Time “+034”This option allows the owner to set the amount of extra rinse agitate time for the Normal cycle.
How to Program Normal Extra Rinse Agitate Time1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the DELICATES (+) or the COLD
C762I
Figure 132
3.Press the DELICATES (+) or the COLD
C778I
Figure 133
4.When “+034” appears in the VFD, press the START (enter) keypad. The current number of minutes set for the Normal Extra Rinse Agitate Time will appear in the VFD.
5.Press the DELICATES (+) or the COLD
NOTE: The Normal Extra Rinse Agitate Time can be set from zero (0) to 15 minutes.
1
3 2
C860I
1Press this pad (+) to scroll forward or increase a value
2Press this pad (enter) to choose a selected value or option
3Press this pad
Figure 134
6.Press the START (enter) keypad when the correct number of minutes appears in the VFD. The next option, “+035”, will appear in the VFD.
NOTE: To program “+035” (Normal Rinse Agitate Time), refer to option 35. To program other options, refer to the appropriate section.
How to Exit Programming Feature
1.Be sure the control shows a programmable option, not a value.
2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.
78 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 210140 |