Programming NetMaster

26.Set Real-Time Clock Minutes “+026”

This option allows the owner to set NetMaster’s internal clock to the correct time in minutes.

How to Program the Clock Minutes

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 108

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+026” appears in the VFD. Refer to Figure 109.

C786I

Figure 109

4.When “+026” appears in the VFD, press the START (enter) keypad. The current time in minutes will appear in the VFD.

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the minutes to the correct time. Refer to Figure 110.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 110

6.Press the START (enter) keypad when the correct time in minutes appears in the VFD. The next option, “+027”, will appear in the VFD.

NOTE: To program “+027” (Set Real-Time Clock Hours), refer to option 27. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

70

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140