10.Special Vend A Start Hour “+010”

This option allows the owner to set the hour that Special Vend A will begin.

How to Program Special Vend A Hour

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 46

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+010” appears in the VFD. Refer to Figure 47.

C772I

Figure 47

4.When “+010” appears in the VFD, press the START (enter) keypad. The current start time (in military time) will appear in the VFD.

NOTE: The hours will be displayed in military time.

Programming NetMaster

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the start hour to the desired hour. Refer to Figure 48.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 48

6.Press the START (enter) keypad when the correct hour appears in the VFD. The next option, “+011”, will appear in the VFD.

NOTE: To program “+011” (Special Vend A Length in Hours), refer to option 11. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

45