
This option allows the owner to set NetMaster’s internal clock to the correct year.
How to Program the Clock Year1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the DELICATES (+) or the COLD
C762I
Figure 123
3.Press the DELICATES (+) or the COLD
C781I
Figure 124
4.When “+031” appears in the VFD, press the START (enter) keypad. The current year will appear in the VFD.
Programming NetMaster
5.Press the DELICATES (+) or the COLD
1
3 2
C860I
1Press this pad (+) to scroll forward or increase a value
2Press this pad (enter) to choose a selected value or option
3Press this pad
Figure 125
6.Press the START (enter) keypad when the correct year appears in the VFD. The next option, “+032”, will appear in the VFD.
NOTE: To program “+032” (Set
How to Exit Programming Feature
1.Be sure the control shows a programmable option, not a value.
2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.
210140 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 75 |