55. Start Pulse Mode “+055”

This option allows the owner to program the Start Pulse Input. The Start Pulse Mode can be used for after-market central pay or card systems. The central system sends the start pulse to the Start Pulse Input of the control to start the cycle. If set for single pulse, one start pulse from the central system will start the cycle. If set for multiple pulses, each pulse will deduct from the vend price the value set up in option 23 (Start Pulse Value) until the vend is satisfied.

How to Program Start Pulse Mode

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 199

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+055” appears in the VFD. Refer to Figure 200.

C816I

Figure 200

4.When “+055” appears in the VFD, press the START (enter) keypad. A number will appear in the VFD. This number corresponds to the current Start Pulse Mode Programming Value.

Programming NetMaster

5.Locate the desired number in the first column of Table 10 below.

“+055”

Start Pulse

Start Pulse

Single Pulse/

Mode Value

ON/OFF

Multiple Pulses

 

 

 

0

OFF

Single Pulse

 

 

 

64

OFF

Multiple Pulses

 

 

 

128

ON

Single Pulse

 

 

 

192

ON

Multiple Pulses

 

 

 

Table 10

6.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number until correct. Refer to Figure 201.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 201

7.Press the START (enter) keypad when the correct number appears in the VFD.

NOTE: To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

107