Programming NetMaster

23. Start Pulse Value “+023”

This option allows the owner to program the value of the Start Pulse if used for multiple pulses with an after-market central card reader or pay system. Refer to option 55 for additional information.

How to Program Start Pulse Value

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 97

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+023” appears in the VFD. Refer to Figure 98.

C789I

Figure 98

4.When “+023” appears in the VFD, press the START (enter) keypad. There are five digits in the Start Pulse Value. The fifth digit will appear in the VFD and will flash one second on and one second off. Refer to Figure 99.

NOTE: If the Start Pulse Value is $100.00 or more, the fifth digit is “1”. If the Start Pulse Value is $99.99 or less, the fifth digit is “0”.

C826I

Figure 99

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the value of the fifth digit. Refer to Figure 100.

NOTE: The Start Pulse Value can be set from 1 to 65,535.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 100

64

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140