29.Set Real-Time Clock Date “+029”

This option allows the owner to set NetMaster’s internal clock to the correct day of the month.

How to Program the Clock Date

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 117

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+029” appears in the VFD. Refer to Figure 118.

C783I

Figure 118

4.When “+029” appears in the VFD, press the START (enter) keypad. The current day of the month will appear in the VFD.

Programming NetMaster

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the day of the month until correct. Refer to Figure 119.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 119

6.Press the START (enter) keypad when the correct day of the month appears in the VFD. The next option, “+030”, will appear in the VFD.

NOTE: To program “+030” (Set Real-Time Clock Month), refer to option 30. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

73