Programming NetMaster

1.Audio Signal “+001”

This option allows the owner to program when the signal will sound.

There are four occasions when a signal may sound during the washer operation. These four occasions are listed below:

1.End of Cycle Signal

By default, the signal is turned off. If turned on, the signal will sound for three seconds at the end of a cycle.

2.Keypad Depression Signal

By default, this signal is turned on and will sound for a quarter of a second. This signal will sound each time a keypad is pressed.

3.Coin Input/Card Insertion Signal

By default, this signal is turned on and will sound for a quarter of a second each time a coin or card is entered.

4.Remove Card Signal (Card Models Only)

By default, this signal is turned on and will sound one second on and one second off when the REMOVE CARD LED is flashing.

How to Program the Audio Signal

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad.

C762I

Figure 5

3.“+001” will appear in the VFD. Press the START (enter) keypad. A number will appear in the VFD. This number corresponds to the current Audio Signal Programming Value.

C821I

Figure 6

4.Locate the desired number in the first column of Table 1 on the following page.

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number until correct. Refer to Figure 7.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 7

For Example: A user might wish to have the signal sound only when a keypad is pressed. Entering the number “1” in step 5 would turn off all the options except KEYPAD. In this instance, the signal would sound only when a keypad is pressed.

6.Press the START (enter) keypad when the correct number appears in the VFD. The next option, “+002”, will appear in the VFD.

NOTE: To program “+002” (Reg. Hot Wash Vend Price), refer to option 2. To program other options, refer to the appropriate section.

24

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140