Manual Reset

This feature allows the owner to reset the washer control’s programming data to the factory default settings by pressing a sequence of pads on the control. For an explanation of the Factory Default Settings, refer to Default Washer Settings.

How to Enter Manual Reset

1.Control must be in Manual Mode to start. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “rSET” appears. Refer to Figure 204.

C830I

Figure 204

3.Press the START (enter) keypad. The control will display “WAIT” until the programming is complete. Once the program has been reset, the control will revert back to the ready mode.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

111