Programming NetMaster

30.Set Real-Time Clock Month “+030”

This option allows the owner to set NetMaster’s internal clock to the correct month.

How to Program the Clock Month

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 120

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+030” appears in the VFD. Refer to Figure 121.

C782I

Figure 121

4.When “+030” appears in the VFD, press the START (enter) keypad. The current month will appear in the VFD.

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the month until correct. Refer to Figure 122.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 122

6.Press the START (enter) keypad when the correct month appears in the VFD. The next option, “+031”, will appear in the VFD.

NOTE: To program “+031” (Set Real-Time Clock Year), refer to option 31. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

74

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140