
This option allows the owner to program an optional warm fill temperature for the final rinse fill. If this option is enabled and HOT or WARM water is selected for the wash fill, warm water will be used for the final rinse fill.
How to Program the Warm Rinse Enable/ Disable1.Control must be in Manual Mode. Refer to Entering the Manual Mode.
2.Press the DELICATES (+) or the COLD
C762I
Figure 165
3.Press the DELICATES (+) or the COLD
C806I
Figure 166
4.When “+045” appears in the VFD, press the START (enter) keypad. A number will appear in the VFD. This number (found below) corresponds to the current Warm Rinse Enable/Disable Value. One (1) = Option Enabled
Zero (0) = Option Disabled
Programming NetMaster
5.Press the DELICATES (+) or the COLD
1
3 2
C860I
1Press this pad (+) to scroll forward or increase a value
2Press this pad (enter) to choose a selected value or option
3Press this pad
Figure 167
6.Press the START (enter) keypad when the correct number appears in the VFD. The next option, “+046”, will appear in the VFD.
NOTE: To program “+046” (Control Configuration Data #1), refer to option 46. To program other options, refer to the appropriate section.
How to Exit Programming Feature
1.Be sure the control shows a programmable option, not a value.
2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.
210140 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 89 |