Programming NetMaster

44. Delicate Final Spin Time “+044”

This option allows the owner to set the amount of final spin time for the Delicate cycle.

How to Program Delicate Final Spin Time

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 162

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+044” appears in the VFD. Refer to Figure 163.

C805I

Figure 163

4.When “+044” appears in the VFD, press the START (enter) keypad. The current number of minutes set for the Delicate Final Spin Time will appear in the VFD.

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes. Refer to Figure 164.

NOTE: The Delicate Final Spin Time can be set from zero (0) to 15 minutes.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 164

6.Press the START (enter) keypad when the correct number of minutes appears in the VFD. The next option, “+045”, will appear in the VFD.

NOTE: To program “+045” (Warm Rinse Enable/ Disable), refer to option 45. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

88

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140