Programming NetMaster

11.Special Vend A Length in Hours “+011”

This option allows the owner to set the length in hours for Special Vend A.

How to Program Special Vend A Length in Hours

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 49

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+011” appears in the VFD. Refer to Figure 50.

C773I

Figure 50

4.When “+011” appears in the VFD, press the START (enter) keypad. The current length in hours will appear in the VFD.

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current length of hours to the desired number of hours. Refer to Figure 51.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 51

6.Press the START (enter) keypad when the correct hour appears in the VFD. The next option, “+012”, will appear in the VFD.

NOTE: To program “+012” (Special Vend A Start Month), refer to option 12. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

46

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140