6.Press the START (enter) keypad to enter the fifth digit and display remaining four digits. The active digit will flash one second on and one second off. Refer to Figure 101.

C827I

Figure 101

7.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the value of the active digit and the START (enter) keypad to enter the value of the digit and advance to the next digit.

8.Press the START (enter) keypad with the last active digit. The next option, “+024”, will appear in the VFD.

NOTE: To program “+024” (Default Cycle/Temperature), refer to option 24. To program other options, refer to the appropriate section.

Programming NetMaster

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

2.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

65