12.Special Vend A Start Month “+012”

This option allows the owner to set the month that Special Vend A will begin.

NOTE: If Special Vend A Start Month, Start Date, End Month, or End Date are programmed to zero (default is zero), the special Vend A will be active every week on the days programmed in option 9.

How to Program Special Vend A Start Month

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 52

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+012” appears in the VFD. Refer to Figure 53.

C774I

Figure 53

4.When “+012” appears in the VFD, press the START (enter) keypad. The current start month will appear in the VFD.

Programming NetMaster

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the start month to the desired month. Refer to Figure 54.

If “0” is selected and Special Vend A is on, Special Vend A will occur at the time and days of week selected, regardless of the month.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 54

6.Press the START (enter) keypad when the correct month appears in the VFD. The next option, “+013”, will appear in the VFD.

NOTE: To program “+013” (Special Vend A Start Date), refer to option 13. To program other options, refer to the appropriate section.

How to Exit Programming Feature

1.Be sure the control shows a programmable option, not a value.

1.While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the ready mode. Refer to Figure 2.

210140

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

47