Programming NetMaster

8.Special Cycle Vend Price “+008”

This option allows the owner to program the machines to offer extra features to the customers for an added vend price. This vend price will be displayed in the VFD for 30 seconds starting 5 seconds after the start (refer to option 49) of the first fill/agitate. Refer to option 49, 50 and 51 for programming these features.

How to Program Special Cycle Vend Price

1.Control must be in Manual Mode. Refer to Entering the Manual Mode.

2.Press the DELICATES (+) or the COLD (-) keypad until “PrOg” appears in the VFD. Press the START (enter) keypad and “+001” will appear in the VFD.

C762I

Figure 38

3.Press the DELICATES (+) or the COLD (-) keypad to scroll through the programmable options until “+008” appears in the VFD. Refer to Figure 39.

C770I

Figure 39

4.When “+008” appears in the VFD, press the START (enter) keypad. There are five digits in the Special Cycle Vend Price. The fifth digit will appear in the VFD and will flash one second on, one second off. Refer to Figure 40.

NOTE: If the vend price is $100.00 or more, the fifth digit is “1”. If the vend price is $99.99 or less, the fifth digit is “0”.

C826I

Figure 40

5.Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number until correct. Refer to Figure 41.

NOTE: The vend price can be set from 1 to 65,535.

1

3 2

C860I

1Press this pad (+) to scroll forward or increase a value

2Press this pad (enter) to choose a selected value or option

3Press this pad (-) to scroll back or decrease a value

Figure 41

6.Press the START (enter) keypad to enter the fifth digit and display the remaining four digits. The active digit will flash one second on and one second off. Refer to Figure 42.

C827I

Figure 42

38

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

210140